lkml.org 
[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/7] spi: add support for octal mode
Date
Add support for octal mode IO data transfer.
Micron flash, mt35xu512aba, supports octal mode data transfer and
NXP FlexSPI controller supports 8 data lines for data transfer (Rx/Tx).

Patch series
* Add support for octal mode flags and parsing of same in spi driver.
* Add parsing logic for spi-mem framework and m25p80.c device file.
* Add opcodes for octal I/O commands in spi-nor framework, Read and Write proto for (1-1-8/1-8-8) mode.
Opcodes are added as per octal data IO commands required for mt35xu512aba [1] flash.
* Add mode bit required for octal mode in nxp-fspi driver [2].
* Define binding property 'spi-rx/tx-bus-width' for LX2160ARDB target [2].

Cherry pick below 2 patches (from: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git):
c639f871febe6667d9afce28108c634e5636c735 spi: spi-mem: Fix inverted logic in op sanity check
db122eb8a749a1eff038f9a282c620ab16c4be1d spi: spi-mem: Add extra sanity checks on the op param

Tested on LX2160ARDB target with nxp-fspi driver, below are
Read performance number of 1-1-1 and 1-1-8 read protocol.

root@lxxx:~# cat /proc/mtd
dev: size erasesize name
mtd0: 04000000 00001000 "spi0.0"
mtd1: 04000000 00001000 "spi0.1"
root@lxxx:~# time mtd_debug read /dev/mtd0 0x0 0x1000000 0read
Copied 16777216 bytes from address 0x00000000 in flash to 0read

real 0m2.792s
user 0m0.000s
sys 0m2.790s
root@lxxx:~# time mtd_debug read /dev/mtd1 0x0 0x1000000 0read
Copied 16777216 bytes from address 0x00000000 in flash to 0read

real 0m0.441s
user 0m0.000s
sys 0m0.440s
root@ls1012ardb:~#

Flash device MTD0 configured in 1-1-1 protocol.
Flash device MTD1 configured in 1-1-8 protocol.

[1] https://patchwork.ozlabs.org/project/linux-mtd/list/?series=70384
[2] https://patchwork.ozlabs.org/project/linux-mtd/list/?series=70210

Yogesh Gaur (7):
spi: add support for octal I/O data transfer
spi: spi-mem: add support for octal I/O data transfer
mtd: spi-nor: add opcodes for octal Read/Write commands
mtd: spi-nor: add octal read flag for flash mt35xu512aba
mtd: m25p80: add support of octal I/O transfer
spi: nxp-fspi: add mode flag bit for octal support
arm64: dts: lx2160a: update fspi node

Changes for v2:
Incorporated review comments of Boris and Vignesh.

arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 ++++
drivers/mtd/devices/m25p80.c | 9 ++++++++-
drivers/mtd/spi-nor/spi-nor.c | 15 ++++++++++++++-
drivers/spi/spi-mem.c | 9 ++++++++-
drivers/spi/spi-nxp-fspi.c | 4 ++--
drivers/spi/spi.c | 6 ++++++
include/linux/mtd/spi-nor.h | 8 ++++++++
include/linux/spi/spi.h | 2 ++
8 files changed, 52 insertions(+), 5 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2018-10-15 14:15    [W:0.245 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site