lkml.org 
[lkml]   [2018]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] ARCv2: build: use mcpu=hs38 iso generic mcpu=archs
Date
Hu Guenter,

> -----Original Message-----
> From: linux-snps-arc [mailto:linux-snps-arc-bounces@lists.infradead.org] On Behalf Of Guenter Roeck
> Sent: Wednesday, September 12, 2018 7:58 PM
> To: Vineet Gupta <vineet.gupta1@synopsys.com>
> Cc: linux-snps-arc@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH] ARCv2: build: use mcpu=hs38 iso generic mcpu=archs
>
> Hi,
>
> On Fri, Sep 07, 2018 at 03:13:10PM -0700, Vineet Gupta wrote:
> > helps gcc with better instruction selections such as 64-bit multiply MPYD
> >
> > before
> > ------
> > 82c34b58 <sched_clock>:
> > 82c34b58: ld r2,[0x83068d00]
> > 82c34b60: add_s r2,r2,0x7530
> > 82c34b66: mov_s r0,0x989680
> > 82c34b6c: mpymu r5,r2,r0
> > 82c34b70: mpy r4,r2,r0
> > 82c34b74: mov_s r0,r4
> > 82c34b76: j_s.d [blink]
> > 82c34b78: mov_s r1,r5
> > 82c34b7a: nop_s
> >
> > after
> > ------
> > 82c34b7c <sched_clock>:
> > 82c34b7c: ld r0,[0x83064d00]
> > 82c34b84: add_s r0,r0,0x7530
> > 82c34b8a: mpydu r0,r0,0x989680
> > 82c34b92: j_s [blink]
> >
> > Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
>
> This patch causes my arc2 test builds to fail
>
> Building arc:axs103_defconfig ... failed
> --------------
> Error log:
>
> standard input}: Assembler messages:
> {standard input}:154: Error: inappropriate arguments for opcode 'st'
> {standard input}:157: Error: Insn j_s has a jump/branch instruction j_s in its delay slot.
> {standard input}:186: Error: inappropriate arguments for opcode 'st'
> make[3]: *** [net/core/dev.o] Error 1
> make[2]: *** [net/core] Error 2
>
> Building arc:nsim_hs_smp_defconfig ... failed
> --------------
> Error log:
> {standard input}: Assembler messages:
> {standard input}:218: Error: inappropriate arguments for opcode 'st'
> {standard input}:9329: Error: inappropriate arguments for opcode 'st'
>
> Building arc:vdk_hs38_smp_defconfig ... failed
> --------------
> Error log:
>
> {standard input}: Assembler messages:
> {standard input}:9629: Error: inappropriate arguments for opcode 'st'
> {standard input}:9883: Error: inappropriate arguments for opcode 'st'
>
> I use a toolchain based on gcc 7.3.0 and binutils 2.30. What version
> of gcc and binutils do I need for the builds to complete ?

I would strongly recommend to use GCC 8.2+ for ARC as there were
quite some improvements and fixes done for ARC.

You may use master branch of Crosstool-NG for building uClibc multilib toolchain
for ARC based on Binutils 2.31.1 and GCC 8.2.0.

Just say "./ct-ng arc-multilib-linux-uclibc" for that.
For me freshly-built tools were able to build Vineet's today's "for-curr" tree
with mentioned patch perfectly fine.

-Alexey

\
 
 \ /
  Last update: 2018-10-11 23:23    [W:0.106 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site