lkml.org 
[lkml]   [2018]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/7] hisi_sas: Misc bugfixes and an optimisation patch
From
Date
On 11/10/2018 11:15, Christoph Hellwig wrote:
> On Thu, Oct 11, 2018 at 10:59:11AM +0100, John Garry wrote:
>>
>>> blk-mq tags are always per-host (which has actually caused problems for
>>> ATA, which is now using its own per-device tags).
>>>
>>
>> So, for example, if Scsi_host.can_queue = 2048 and Scsi_host.nr_hw_queues =
>> 16, then rq tags are still in range [0, 2048) for that HBA, i.e. invariant
>> on queue count?
>
> Yes, if can_queue is 2048 you will gets tags from 0..2047.
>

I should be clear about some things before discussing this further. Our
device has 16 hw queues. And each command we send to any queue in the
device must have a unique tag across all hw queues for that device, and
should be in the range [0, 2048) - it's called an IPTT. So
Scsi_host.can_queue = 2048.

However today we only expose a single queue to upper layer (for
unrelated LLDD error handling restriction). We hope to expose all 16
queues in future, which is what I meant by "enabling SCSI MQ in the
driver". However, with 6/7, this creates a problem, below.

> IFF you device needs different tags for different queues it can use
> the blk_mq_unique_tag heper to generate unique global tag.

So this helper can't help, as fundamentially the issue is "the tag field
in struct request is unique per hardware queue but not all all hw
queues". Indeed blk_mq_unique_tag() does give a unique global tag, but
cannot be used for the IPTT.

OTOH, We could expose 16 queues to upper layer, and drop 6/7, but we
found it performs worse.

>
> But unless you actuall have multiple hardware queues that latter part
> is rather irrelevant to start with.
>
> .
>

Thanks,
John

\
 
 \ /
  Last update: 2018-10-11 15:12    [W:0.050 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site