lkml.org 
[lkml]   [2018]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] b43: Replace mdelay with usleep_range in b43_radio_2057_init_post
Date
b43_radio_2057_init_post is not called in an interrupt handler
nor holding a spinlock.
The function mdelay in it can be replaced with usleep_range,
to reduce busy wait.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
---
v2:
* Replace mdelay with usleep_range, instead of msleep in v1.
Thank Larry for good advice.
---
drivers/net/wireless/broadcom/b43/phy_n.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43/phy_n.c b/drivers/net/wireless/broadcom/b43/phy_n.c
index a5557d7..f2a2f41 100644
--- a/drivers/net/wireless/broadcom/b43/phy_n.c
+++ b/drivers/net/wireless/broadcom/b43/phy_n.c
@@ -1031,7 +1031,7 @@ static void b43_radio_2057_init_post(struct b43_wldev *dev)

b43_radio_set(dev, R2057_RFPLL_MISC_CAL_RESETN, 0x78);
b43_radio_set(dev, R2057_XTAL_CONFIG2, 0x80);
- mdelay(2);
+ usleep_range(2000, 3000);
b43_radio_mask(dev, R2057_RFPLL_MISC_CAL_RESETN, ~0x78);
b43_radio_mask(dev, R2057_XTAL_CONFIG2, ~0x80);

--
1.7.9.5
\
 
 \ /
  Last update: 2018-01-14 23:18    [W:0.067 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site