lkml.org 
[lkml]   [2018]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH 6/6] ARM64: dts: meson-axg: enable the UART_A controller
    From
    Date
    On Fri, 2018-01-05 at 17:56 +0800, Yixun Lan wrote:
    > The UART_A is connect to a BT module in the S400 board.

    The UART_A is connected to a BT module on the S400 board.
    -- --

    Apart from this:
    Acked-by: Jerome Brunet <jbrunet@baylibre.com>


    >
    > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
    > ---
    > arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 7 +++++++
    > 1 file changed, 7 insertions(+)
    >
    > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
    > index 2b79be356996..7e03b8da4856 100644
    > --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
    > +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
    > @@ -14,9 +14,16 @@
    >
    > aliases {
    > serial0 = &uart_AO;
    > + serial1 = &uart_A;
    > };
    > };
    >
    > +&uart_A {
    > + status = "okay";
    > + pinctrl-0 = <&uart_a_pins>;
    > + pinctrl-names = "default";
    > +};
    > +
    > &uart_AO {
    > status = "okay";
    > pinctrl-0 = <&uart_ao_a_pins>;

    \
     
     \ /
      Last update: 2018-01-05 11:27    [W:4.898 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site