lkml.org 
[lkml]   [2018]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 5/6] arm: dts: sun8i: a83t: bananapi-m3: Enable IR controller
On Mon, Jan 29, 2018 at 04:58:09PM +0100, Philipp Rossak wrote:
> The Bananapi M3 has an onboard IR receiver.
> This enables the onboard IR receiver subnode.
> Unlike the other IR receivers this one needs a base clock frequency
> of 3000000 Hz (3 MHz), to be able to work.
>
> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
> Acked-by: Chen-Yu Tsai <wens@csie.org>
> ---
> arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> index 6550bf0e594b..ffc6445fd281 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
> @@ -82,6 +82,13 @@
> };
> };
>
> +&cir {
> + pinctrl-names = "default";
> + pinctrl-0 = <&cir_pins>;

If this is the only muxing option (like your node name suggests), you
can put it directly in the DTSI to remove boilerplate from all the
DTS.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-01-30 09:43    [W:0.053 / U:0.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site