lkml.org 
[lkml]   [2018]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/9] clk: meson: pll fixes
From
Date
On Fri, 2018-01-19 at 16:55 +0100, Jerome Brunet wrote:
> This changeset is a collection of fixes and clean-up around the pll clock
> provider. This has been triggered by the discussion around the ethernet
> clock on the axg [0].
>
> On the axg the rate reported by the fixed_pll is off by 8Mhz, which leads
> the internal mux of the ethernet driver to pick an mpll2 instead of the
> fdiv4.
>
> With this series applied, the fixed_pll of the axg now reports
> 1999998046 Hz, which is coherent with measurements (~2GHz)
>
> While debugging this, we uncovered quite a mess around the hdmi_pll
> of the gxbb and gxl family. This is also fixed by this series.
>
> Last, the parameters table provided to the read-only sys_plls have
> been removed, saving a bit of memory
>
> There is still work to be done on this clock provider. Someday,
> I hope to see the parameter tables go away completely. This pll
> is just a (quite complex) fractional divider, we sould be able to
> figure something out at runtime.
>
> Changes since v1: [1]
> * fix several typos in the comments
> * fix arm32 u64 math in patch 3 (Thanks a lot Martin!!)
>
> [0]: https://lkml.kernel.org/r/1516095424.2608.36.camel@baylibre.com
> [1]: https://lkml.kernel.org/r/20180118184532.6856-1-jbrunet@baylibre.com

Series applied clk-meson next/drivers

\
 
 \ /
  Last update: 2018-01-30 20:11    [W:0.058 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site