lkml.org 
[lkml]   [2018]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v8 03/11] media: platform: Add Renesas CEU driver
    Date
    Add driver for Renesas Capture Engine Unit (CEU).

    The CEU interface supports capturing 'data' (YUV422) and 'images'
    (NV[12|21|16|61]).

    This driver aims to replace the soc_camera-based sh_mobile_ceu one.

    Tested with ov7670 camera sensor, providing YUYV_2X8 data on Renesas RZ
    platform GR-Peach.

    Tested with ov7725 camera sensor on SH4 platform Migo-R.

    Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
    Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
    ---
    drivers/media/platform/Kconfig | 9 +
    drivers/media/platform/Makefile | 1 +
    drivers/media/platform/renesas-ceu.c | 1661 ++++++++++++++++++++++++++++++++++
    3 files changed, 1671 insertions(+)
    create mode 100644 drivers/media/platform/renesas-ceu.c

    diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
    index 614fbef..f9cc058 100644
    --- a/drivers/media/platform/Kconfig
    +++ b/drivers/media/platform/Kconfig
    @@ -144,6 +144,15 @@ config VIDEO_STM32_DCMI
    To compile this driver as a module, choose M here: the module
    will be called stm32-dcmi.

    +config VIDEO_RENESAS_CEU
    + tristate "Renesas Capture Engine Unit (CEU) driver"
    + depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
    + depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
    + select VIDEOBUF2_DMA_CONTIG
    + select V4L2_FWNODE
    + ---help---
    + This is a v4l2 driver for the Renesas CEU Interface
    +
    source "drivers/media/platform/soc_camera/Kconfig"
    source "drivers/media/platform/exynos4-is/Kconfig"
    source "drivers/media/platform/am437x/Kconfig"
    diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
    index 7f30804..85e1121 100644
    --- a/drivers/media/platform/Makefile
    +++ b/drivers/media/platform/Makefile
    @@ -62,6 +62,7 @@ obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o
    obj-$(CONFIG_SOC_CAMERA) += soc_camera/

    obj-$(CONFIG_VIDEO_RCAR_DRIF) += rcar_drif.o
    +obj-$(CONFIG_VIDEO_RENESAS_CEU) += renesas-ceu.o
    obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o
    obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o
    obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o
    diff --git a/drivers/media/platform/renesas-ceu.c b/drivers/media/platform/renesas-ceu.c
    new file mode 100644
    index 0000000..d0ac500
    --- /dev/null
    +++ b/drivers/media/platform/renesas-ceu.c
    @@ -0,0 +1,1661 @@
    +// SPDX-License-Identifier: GPL-2.0
    +/*
    + * V4L2 Driver for Renesas Capture Engine Unit (CEU) interface
    + * Copyright (C) 2017-2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
    + *
    + * Based on soc-camera driver "soc_camera/sh_mobile_ceu_camera.c"
    + * Copyright (C) 2008 Magnus Damm
    + *
    + * Based on V4L2 Driver for PXA camera host - "pxa_camera.c",
    + * Copyright (C) 2006, Sascha Hauer, Pengutronix
    + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
    + */
    +
    +#include <linux/delay.h>
    +#include <linux/device.h>
    +#include <linux/dma-mapping.h>
    +#include <linux/err.h>
    +#include <linux/errno.h>
    +#include <linux/interrupt.h>
    +#include <linux/io.h>
    +#include <linux/kernel.h>
    +#include <linux/mm.h>
    +#include <linux/module.h>
    +#include <linux/of.h>
    +#include <linux/of_device.h>
    +#include <linux/of_graph.h>
    +#include <linux/platform_device.h>
    +#include <linux/pm_runtime.h>
    +#include <linux/slab.h>
    +#include <linux/time.h>
    +#include <linux/videodev2.h>
    +
    +#include <media/v4l2-async.h>
    +#include <media/v4l2-common.h>
    +#include <media/v4l2-ctrls.h>
    +#include <media/v4l2-dev.h>
    +#include <media/v4l2-device.h>
    +#include <media/v4l2-event.h>
    +#include <media/v4l2-fwnode.h>
    +#include <media/v4l2-image-sizes.h>
    +#include <media/v4l2-ioctl.h>
    +#include <media/v4l2-mediabus.h>
    +#include <media/videobuf2-dma-contig.h>
    +
    +#include <media/drv-intf/renesas-ceu.h>
    +
    +#define DRIVER_NAME "renesas-ceu"
    +
    +/* CEU registers offsets and masks. */
    +#define CEU_CAPSR 0x00 /* Capture start register */
    +#define CEU_CAPCR 0x04 /* Capture control register */
    +#define CEU_CAMCR 0x08 /* Capture interface control register */
    +#define CEU_CAMOR 0x10 /* Capture interface offset register */
    +#define CEU_CAPWR 0x14 /* Capture interface width register */
    +#define CEU_CAIFR 0x18 /* Capture interface input format register */
    +#define CEU_CRCNTR 0x28 /* CEU register control register */
    +#define CEU_CRCMPR 0x2c /* CEU register forcible control register */
    +#define CEU_CFLCR 0x30 /* Capture filter control register */
    +#define CEU_CFSZR 0x34 /* Capture filter size clip register */
    +#define CEU_CDWDR 0x38 /* Capture destination width register */
    +#define CEU_CDAYR 0x3c /* Capture data address Y register */
    +#define CEU_CDACR 0x40 /* Capture data address C register */
    +#define CEU_CFWCR 0x5c /* Firewall operation control register */
    +#define CEU_CDOCR 0x64 /* Capture data output control register */
    +#define CEU_CEIER 0x70 /* Capture event interrupt enable register */
    +#define CEU_CETCR 0x74 /* Capture event flag clear register */
    +#define CEU_CSTSR 0x7c /* Capture status register */
    +#define CEU_CSRTR 0x80 /* Capture software reset register */
    +
    +/* Data synchronous fetch mode. */
    +#define CEU_CAMCR_JPEG BIT(4)
    +
    +/* Input components ordering: CEU_CAMCR.DTARY field. */
    +#define CEU_CAMCR_DTARY_8_UYVY (0x00 << 8)
    +#define CEU_CAMCR_DTARY_8_VYUY (0x01 << 8)
    +#define CEU_CAMCR_DTARY_8_YUYV (0x02 << 8)
    +#define CEU_CAMCR_DTARY_8_YVYU (0x03 << 8)
    +/* TODO: input components ordering for 16 bits input. */
    +
    +/* Bus transfer MTU. */
    +#define CEU_CAPCR_BUS_WIDTH256 (0x3 << 20)
    +
    +/* Bus width configuration. */
    +#define CEU_CAMCR_DTIF_16BITS BIT(12)
    +
    +/* No downsampling to planar YUV420 in image fetch mode. */
    +#define CEU_CDOCR_NO_DOWSAMPLE BIT(4)
    +
    +/* Swap all input data in 8-bit, 16-bits and 32-bits units (Figure 46.45). */
    +#define CEU_CDOCR_SWAP_ENDIANNESS (7)
    +
    +/* Capture reset and enable bits. */
    +#define CEU_CAPSR_CPKIL BIT(16)
    +#define CEU_CAPSR_CE BIT(0)
    +
    +/* CEU operating flag bit. */
    +#define CEU_CAPCR_CTNCP BIT(16)
    +#define CEU_CSTRST_CPTON BIT(1)
    +
    +/* Platform specific IRQ source flags. */
    +#define CEU_CETCR_ALL_IRQS_RZ 0x397f313
    +#define CEU_CETCR_ALL_IRQS_SH4 0x3d7f313
    +
    +/* Prohibited register access interrupt bit. */
    +#define CEU_CETCR_IGRW BIT(4)
    +/* One-frame capture end interrupt. */
    +#define CEU_CEIER_CPE BIT(0)
    +/* VBP error. */
    +#define CEU_CEIER_VBP BIT(20)
    +#define CEU_CEIER_MASK (CEU_CEIER_CPE | CEU_CEIER_VBP)
    +
    +#define CEU_MAX_WIDTH 2560
    +#define CEU_MAX_HEIGHT 1920
    +#define CEU_MAX_BPL 8188
    +#define CEU_W_MAX(w) ((w) < CEU_MAX_WIDTH ? (w) : CEU_MAX_WIDTH)
    +#define CEU_H_MAX(h) ((h) < CEU_MAX_HEIGHT ? (h) : CEU_MAX_HEIGHT)
    +
    +/*
    + * ceu_bus_fmt - describe a 8-bits yuyv format the sensor can produce
    + *
    + * @mbus_code: bus format code
    + * @fmt_order: CEU_CAMCR.DTARY ordering of input components (Y, Cb, Cr)
    + * @fmt_order_swap: swapped CEU_CAMCR.DTARY ordering of input components
    + * (Y, Cr, Cb)
    + * @swapped: does Cr appear before Cb?
    + * @bps: number of bits sent over bus for each sample
    + * @bpp: number of bits per pixels unit
    + */
    +struct ceu_mbus_fmt {
    + u32 mbus_code;
    + u32 fmt_order;
    + u32 fmt_order_swap;
    + bool swapped;
    + u8 bps;
    + u8 bpp;
    +};
    +
    +/*
    + * ceu_buffer - Link vb2 buffer to the list of available buffers.
    + */
    +struct ceu_buffer {
    + struct vb2_v4l2_buffer vb;
    + struct list_head queue;
    +};
    +
    +static inline struct ceu_buffer *vb2_to_ceu(struct vb2_v4l2_buffer *vbuf)
    +{
    + return container_of(vbuf, struct ceu_buffer, vb);
    +}
    +
    +/*
    + * ceu_subdev - Wraps v4l2 sub-device and provides async subdevice.
    + */
    +struct ceu_subdev {
    + struct v4l2_subdev *v4l2_sd;
    + struct v4l2_async_subdev asd;
    +
    + /* per-subdevice mbus configuration options */
    + unsigned int mbus_flags;
    + struct ceu_mbus_fmt mbus_fmt;
    +};
    +
    +static struct ceu_subdev *to_ceu_subdev(struct v4l2_async_subdev *asd)
    +{
    + return container_of(asd, struct ceu_subdev, asd);
    +}
    +
    +/*
    + * ceu_device - CEU device instance
    + */
    +struct ceu_device {
    + struct device *dev;
    + struct video_device vdev;
    + struct v4l2_device v4l2_dev;
    +
    + /* subdevices descriptors */
    + struct ceu_subdev *subdevs;
    + /* the subdevice currently in use */
    + struct ceu_subdev *sd;
    + unsigned int sd_index;
    + unsigned int num_sd;
    +
    + /* platform specific mask with all IRQ sources flagged */
    + u32 irq_mask;
    +
    + /* currently configured field and pixel format */
    + enum v4l2_field field;
    + struct v4l2_pix_format_mplane v4l2_pix;
    +
    + /* async subdev notification helpers */
    + struct v4l2_async_notifier notifier;
    + /* pointers to "struct ceu_subdevice -> asd" */
    + struct v4l2_async_subdev **asds;
    +
    + /* vb2 queue, capture buffer list and active buffer pointer */
    + struct vb2_queue vb2_vq;
    + struct list_head capture;
    + struct vb2_v4l2_buffer *active;
    + unsigned int sequence;
    +
    + /* mlock - lock access to interface reset and vb2 queue */
    + struct mutex mlock;
    +
    + /* lock - lock access to capture buffer queue and active buffer */
    + spinlock_t lock;
    +
    + /* base - CEU memory base address */
    + void __iomem *base;
    +};
    +
    +static inline struct ceu_device *v4l2_to_ceu(struct v4l2_device *v4l2_dev)
    +{
    + return container_of(v4l2_dev, struct ceu_device, v4l2_dev);
    +}
    +
    +/* --- CEU memory output formats --- */
    +
    +/*
    + * ceu_fmt - describe a memory output format supported by CEU interface.
    + *
    + * @fourcc: memory layout fourcc format code
    + * @bpp: number of bits for each pixel stored in memory
    + */
    +struct ceu_fmt {
    + u32 fourcc;
    + u32 bpp;
    +};
    +
    +/*
    + * ceu_format_list - List of supported memory output formats
    + *
    + * If sensor provides any YUYV bus format, all the following planar memory
    + * formats are available thanks to CEU re-ordering and sub-sampling
    + * capabilities.
    + */
    +static const struct ceu_fmt ceu_fmt_list[] = {
    + {
    + .fourcc = V4L2_PIX_FMT_NV16,
    + .bpp = 16,
    + },
    + {
    + .fourcc = V4L2_PIX_FMT_NV61,
    + .bpp = 16,
    + },
    + {
    + .fourcc = V4L2_PIX_FMT_NV12,
    + .bpp = 12,
    + },
    + {
    + .fourcc = V4L2_PIX_FMT_NV21,
    + .bpp = 12,
    + },
    + {
    + .fourcc = V4L2_PIX_FMT_YUYV,
    + .bpp = 16,
    + },
    +};
    +
    +static const struct ceu_fmt *get_ceu_fmt_from_fourcc(unsigned int fourcc)
    +{
    + const struct ceu_fmt *fmt = &ceu_fmt_list[0];
    + unsigned int i;
    +
    + for (i = 0; i < ARRAY_SIZE(ceu_fmt_list); i++, fmt++)
    + if (fmt->fourcc == fourcc)
    + return fmt;
    +
    + return NULL;
    +}
    +
    +static bool ceu_fmt_mplane(struct v4l2_pix_format_mplane *pix)
    +{
    + switch (pix->pixelformat) {
    + case V4L2_PIX_FMT_YUYV:
    + return false;
    + case V4L2_PIX_FMT_NV16:
    + case V4L2_PIX_FMT_NV61:
    + case V4L2_PIX_FMT_NV12:
    + case V4L2_PIX_FMT_NV21:
    + return true;
    + default:
    + return false;
    + }
    +}
    +
    +/* --- CEU HW operations --- */
    +
    +static void ceu_write(struct ceu_device *priv, unsigned int reg_offs, u32 data)
    +{
    + iowrite32(data, priv->base + reg_offs);
    +}
    +
    +static u32 ceu_read(struct ceu_device *priv, unsigned int reg_offs)
    +{
    + return ioread32(priv->base + reg_offs);
    +}
    +
    +/*
    + * ceu_soft_reset() - Software reset the CEU interface.
    + * @ceu_device: CEU device.
    + *
    + * Returns 0 for success, -EIO for error.
    + */
    +static int ceu_soft_reset(struct ceu_device *ceudev)
    +{
    + unsigned int i;
    +
    + ceu_write(ceudev, CEU_CAPSR, CEU_CAPSR_CPKIL);
    +
    + for (i = 0; i < 100; i++) {
    + if (!(ceu_read(ceudev, CEU_CSTSR) & CEU_CSTRST_CPTON))
    + break;
    + udelay(1);
    + }
    +
    + if (i == 100) {
    + dev_err(ceudev->dev, "soft reset time out\n");
    + return -EIO;
    + }
    +
    + for (i = 0; i < 100; i++) {
    + if (!(ceu_read(ceudev, CEU_CAPSR) & CEU_CAPSR_CPKIL))
    + return 0;
    + udelay(1);
    + }
    +
    + /* If we get here, CEU has not reset properly. */
    + return -EIO;
    +}
    +
    +/* --- CEU Capture Operations --- */
    +
    +/*
    + * ceu_hw_config() - Configure CEU interface registers.
    + */
    +static int ceu_hw_config(struct ceu_device *ceudev)
    +{
    + u32 camcr, cdocr, cfzsr, cdwdr, capwr;
    + struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix;
    + struct ceu_subdev *ceu_sd = ceudev->sd;
    + struct ceu_mbus_fmt *mbus_fmt = &ceu_sd->mbus_fmt;
    + unsigned int mbus_flags = ceu_sd->mbus_flags;
    +
    + /* Start configuring CEU registers */
    + ceu_write(ceudev, CEU_CAIFR, 0);
    + ceu_write(ceudev, CEU_CFWCR, 0);
    + ceu_write(ceudev, CEU_CRCNTR, 0);
    + ceu_write(ceudev, CEU_CRCMPR, 0);
    +
    + /* Set the frame capture period for both image capture and data sync. */
    + capwr = (pix->height << 16) | pix->width * mbus_fmt->bpp / 8;
    +
    + /*
    + * Swap input data endianness by default.
    + * In data fetch mode bytes are received in chunks of 8 bytes.
    + * D0, D1, D2, D3, D4, D5, D6, D7 (D0 received first)
    + * The data is however by default written to memory in reverse order:
    + * D7, D6, D5, D4, D3, D2, D1, D0 (D7 written to lowest byte)
    + *
    + * Use CEU_CDOCR[2:0] to swap data ordering.
    + */
    + cdocr = CEU_CDOCR_SWAP_ENDIANNESS;
    +
    + /*
    + * Configure CAMCR and CDOCR:
    + * match input components ordering with memory output format and
    + * handle downsampling to YUV420.
    + *
    + * If the memory output planar format is 'swapped' (Cr before Cb) and
    + * input format is not, use the swapped version of CAMCR.DTARY.
    + *
    + * If the memory output planar format is not 'swapped' (Cb before Cr)
    + * and input format is, use the swapped version of CAMCR.DTARY.
    + *
    + * CEU by default downsample to planar YUV420 (CDCOR[4] = 0).
    + * If output is planar YUV422 set CDOCR[4] = 1
    + *
    + * No downsample for data fetch sync mode.
    + */
    + switch (pix->pixelformat) {
    + /* Data fetch sync mode */
    + case V4L2_PIX_FMT_YUYV:
    + /* TODO: handle YUYV permutations through DTARY bits. */
    + camcr = CEU_CAMCR_JPEG;
    + cdocr |= CEU_CDOCR_NO_DOWSAMPLE;
    + cfzsr = (pix->height << 16) | pix->width;
    + cdwdr = pix->plane_fmt[0].bytesperline;
    + break;
    +
    + /* Non-swapped planar image capture mode. */
    + case V4L2_PIX_FMT_NV16:
    + cdocr |= CEU_CDOCR_NO_DOWSAMPLE;
    + case V4L2_PIX_FMT_NV12:
    + if (mbus_fmt->swapped)
    + camcr = mbus_fmt->fmt_order_swap;
    + else
    + camcr = mbus_fmt->fmt_order;
    +
    + cfzsr = (pix->height << 16) | pix->width;
    + cdwdr = pix->width;
    + break;
    +
    + /* Swapped planar image capture mode. */
    + case V4L2_PIX_FMT_NV61:
    + cdocr |= CEU_CDOCR_NO_DOWSAMPLE;
    + case V4L2_PIX_FMT_NV21:
    + if (mbus_fmt->swapped)
    + camcr = mbus_fmt->fmt_order;
    + else
    + camcr = mbus_fmt->fmt_order_swap;
    +
    + cfzsr = (pix->height << 16) | pix->width;
    + cdwdr = pix->width;
    + break;
    + }
    +
    + camcr |= mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? 1 << 1 : 0;
    + camcr |= mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? 1 << 0 : 0;
    +
    + /* TODO: handle 16 bit bus width with DTIF bit in CAMCR */
    + ceu_write(ceudev, CEU_CAMCR, camcr);
    + ceu_write(ceudev, CEU_CDOCR, cdocr);
    + ceu_write(ceudev, CEU_CAPCR, CEU_CAPCR_BUS_WIDTH256);
    +
    + /*
    + * TODO: make CAMOR offsets configurable.
    + * CAMOR wants to know the number of blanks between a VS/HS signal
    + * and valid data. This value should actually come from the sensor...
    + */
    + ceu_write(ceudev, CEU_CAMOR, 0);
    +
    + /* TODO: 16 bit bus width require re-calculation of cdwdr and cfzsr */
    + ceu_write(ceudev, CEU_CAPWR, capwr);
    + ceu_write(ceudev, CEU_CFSZR, cfzsr);
    + ceu_write(ceudev, CEU_CDWDR, cdwdr);
    +
    + return 0;
    +}
    +
    +/*
    + * ceu_capture() - Trigger start of a capture sequence.
    + *
    + * Program the CEU DMA registers with addresses where to transfer image data.
    + */
    +static int ceu_capture(struct ceu_device *ceudev)
    +{
    + struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix;
    + dma_addr_t phys_addr_top;
    +
    + phys_addr_top =
    + vb2_dma_contig_plane_dma_addr(&ceudev->active->vb2_buf, 0);
    + ceu_write(ceudev, CEU_CDAYR, phys_addr_top);
    +
    + /* Ignore CbCr plane for non multi-planar image formats. */
    + if (ceu_fmt_mplane(pix)) {
    + phys_addr_top =
    + vb2_dma_contig_plane_dma_addr(&ceudev->active->vb2_buf,
    + 1);
    + ceu_write(ceudev, CEU_CDACR, phys_addr_top);
    + }
    +
    + /*
    + * Trigger new capture start: once for each frame, as we work in
    + * one-frame capture mode.
    + */
    + ceu_write(ceudev, CEU_CAPSR, CEU_CAPSR_CE);
    +
    + return 0;
    +}
    +
    +static irqreturn_t ceu_irq(int irq, void *data)
    +{
    + struct ceu_device *ceudev = data;
    + struct vb2_v4l2_buffer *vbuf;
    + struct ceu_buffer *buf;
    + u32 status;
    +
    + /* Clean interrupt status. */
    + status = ceu_read(ceudev, CEU_CETCR);
    + ceu_write(ceudev, CEU_CETCR, ~ceudev->irq_mask);
    +
    + /* Unexpected interrupt. */
    + if (!(status & CEU_CEIER_MASK))
    + return IRQ_NONE;
    +
    + spin_lock(&ceudev->lock);
    +
    + /* Stale interrupt from a released buffer, ignore it. */
    + vbuf = ceudev->active;
    + if (!vbuf) {
    + spin_unlock(&ceudev->lock);
    + return IRQ_HANDLED;
    + }
    +
    + /*
    + * When a VBP interrupt occurs, no capture end interrupt will occur
    + * and the image of that frame is not captured correctly.
    + */
    + if (status & CEU_CEIER_VBP) {
    + dev_err(ceudev->dev, "VBP interrupt: abort capture\n");
    + goto error_irq_out;
    + }
    +
    + /* Prepare to return the 'previous' buffer. */
    + vbuf->vb2_buf.timestamp = ktime_get_ns();
    + vbuf->sequence = ceudev->sequence++;
    + vbuf->field = ceudev->field;
    +
    + /* Prepare a new 'active' buffer and trigger a new capture. */
    + if (!list_empty(&ceudev->capture)) {
    + buf = list_first_entry(&ceudev->capture, struct ceu_buffer,
    + queue);
    + list_del(&buf->queue);
    + ceudev->active = &buf->vb;
    +
    + ceu_capture(ceudev);
    + }
    +
    + /* Return the 'previous' buffer. */
    + vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_DONE);
    +
    + spin_unlock(&ceudev->lock);
    +
    + return IRQ_HANDLED;
    +
    +error_irq_out:
    + /* Return the 'previous' buffer and all queued ones. */
    + vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_ERROR);
    +
    + list_for_each_entry(buf, &ceudev->capture, queue)
    + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
    +
    + spin_unlock(&ceudev->lock);
    +
    + return IRQ_HANDLED;
    +}
    +
    +/* --- CEU Videobuf2 operations --- */
    +
    +static void ceu_update_plane_sizes(struct v4l2_plane_pix_format *plane,
    + unsigned int bpl, unsigned int szimage)
    +{
    + memset(plane, 0, sizeof(*plane));
    +
    + plane->sizeimage = szimage;
    + if (plane->bytesperline < bpl || plane->bytesperline > CEU_MAX_BPL)
    + plane->bytesperline = bpl;
    +}
    +
    +/*
    + * ceu_calc_plane_sizes() - Fill per-plane 'struct v4l2_plane_pix_format'
    + * information according to the currently configured
    + * pixel format.
    + * @ceu_device: CEU device.
    + * @ceu_fmt: Active image format.
    + * @pix: Pixel format information (store line width and image sizes)
    + */
    +static void ceu_calc_plane_sizes(struct ceu_device *ceudev,
    + const struct ceu_fmt *ceu_fmt,
    + struct v4l2_pix_format_mplane *pix)
    +{
    + unsigned int bpl, szimage;
    +
    + switch (pix->pixelformat) {
    + case V4L2_PIX_FMT_YUYV:
    + pix->num_planes = 1;
    + bpl = pix->width * ceu_fmt->bpp / 8;
    + szimage = pix->height * bpl;
    + ceu_update_plane_sizes(&pix->plane_fmt[0], bpl, szimage);
    + break;
    +
    + case V4L2_PIX_FMT_NV12:
    + case V4L2_PIX_FMT_NV21:
    + pix->num_planes = 2;
    + bpl = pix->width;
    + szimage = pix->height * pix->width;
    + ceu_update_plane_sizes(&pix->plane_fmt[0], bpl, szimage);
    + ceu_update_plane_sizes(&pix->plane_fmt[1], bpl, szimage / 2);
    + break;
    +
    + case V4L2_PIX_FMT_NV16:
    + case V4L2_PIX_FMT_NV61:
    + default:
    + pix->num_planes = 2;
    + bpl = pix->width;
    + szimage = pix->height * pix->width;
    + ceu_update_plane_sizes(&pix->plane_fmt[0], bpl, szimage);
    + ceu_update_plane_sizes(&pix->plane_fmt[1], bpl, szimage);
    + break;
    + }
    +}
    +
    +/*
    + * ceu_vb2_setup() - is called to check whether the driver can accept the
    + * requested number of buffers and to fill in plane sizes
    + * for the current frame format, if required.
    + */
    +static int ceu_vb2_setup(struct vb2_queue *vq, unsigned int *count,
    + unsigned int *num_planes, unsigned int sizes[],
    + struct device *alloc_devs[])
    +{
    + struct ceu_device *ceudev = vb2_get_drv_priv(vq);
    + struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix;
    + unsigned int i;
    +
    + /* num_planes is set: just check plane sizes. */
    + if (*num_planes) {
    + for (i = 0; i < pix->num_planes; i++)
    + if (sizes[i] < pix->plane_fmt[i].sizeimage)
    + return -EINVAL;
    +
    + return 0;
    + }
    +
    + /* num_planes not set: called from REQBUFS, just set plane sizes. */
    + *num_planes = pix->num_planes;
    + for (i = 0; i < pix->num_planes; i++)
    + sizes[i] = pix->plane_fmt[i].sizeimage;
    +
    + return 0;
    +}
    +
    +static void ceu_vb2_queue(struct vb2_buffer *vb)
    +{
    + struct ceu_device *ceudev = vb2_get_drv_priv(vb->vb2_queue);
    + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
    + struct ceu_buffer *buf = vb2_to_ceu(vbuf);
    + unsigned long irqflags;
    +
    + spin_lock_irqsave(&ceudev->lock, irqflags);
    + list_add_tail(&buf->queue, &ceudev->capture);
    + spin_unlock_irqrestore(&ceudev->lock, irqflags);
    +}
    +
    +static int ceu_vb2_prepare(struct vb2_buffer *vb)
    +{
    + struct ceu_device *ceudev = vb2_get_drv_priv(vb->vb2_queue);
    + struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix;
    + unsigned int i;
    +
    + for (i = 0; i < pix->num_planes; i++) {
    + if (vb2_plane_size(vb, i) < pix->plane_fmt[i].sizeimage) {
    + dev_err(ceudev->dev,
    + "Plane size too small (%lu < %u)\n",
    + vb2_plane_size(vb, i),
    + pix->plane_fmt[i].sizeimage);
    + return -EINVAL;
    + }
    +
    + vb2_set_plane_payload(vb, i, pix->plane_fmt[i].sizeimage);
    + }
    +
    + return 0;
    +}
    +
    +static int ceu_start_streaming(struct vb2_queue *vq, unsigned int count)
    +{
    + struct ceu_device *ceudev = vb2_get_drv_priv(vq);
    + struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd;
    + struct ceu_buffer *buf;
    + unsigned long irqflags;
    + int ret;
    +
    + /* Program the CEU interface according to the CEU image format. */
    + ret = ceu_hw_config(ceudev);
    + if (ret)
    + goto error_return_bufs;
    +
    + ret = v4l2_subdev_call(v4l2_sd, video, s_stream, 1);
    + if (ret && ret != -ENOIOCTLCMD) {
    + dev_dbg(ceudev->dev,
    + "Subdevice failed to start streaming: %d\n", ret);
    + goto error_return_bufs;
    + }
    +
    + spin_lock_irqsave(&ceudev->lock, irqflags);
    + ceudev->sequence = 0;
    +
    + /* Grab the first available buffer and trigger the first capture. */
    + buf = list_first_entry(&ceudev->capture, struct ceu_buffer,
    + queue);
    + if (!buf) {
    + spin_unlock_irqrestore(&ceudev->lock, irqflags);
    + dev_dbg(ceudev->dev,
    + "No buffer available for capture.\n");
    + goto error_stop_sensor;
    + }
    +
    + list_del(&buf->queue);
    + ceudev->active = &buf->vb;
    +
    + /* Clean and program interrupts for first capture. */
    + ceu_write(ceudev, CEU_CETCR, ~ceudev->irq_mask);
    + ceu_write(ceudev, CEU_CEIER, CEU_CEIER_MASK);
    +
    + ceu_capture(ceudev);
    +
    + spin_unlock_irqrestore(&ceudev->lock, irqflags);
    +
    + return 0;
    +
    +error_stop_sensor:
    + v4l2_subdev_call(v4l2_sd, video, s_stream, 0);
    +
    +error_return_bufs:
    + spin_lock_irqsave(&ceudev->lock, irqflags);
    + list_for_each_entry(buf, &ceudev->capture, queue)
    + vb2_buffer_done(&ceudev->active->vb2_buf,
    + VB2_BUF_STATE_QUEUED);
    + ceudev->active = NULL;
    + spin_unlock_irqrestore(&ceudev->lock, irqflags);
    +
    + return ret;
    +}
    +
    +static void ceu_stop_streaming(struct vb2_queue *vq)
    +{
    + struct ceu_device *ceudev = vb2_get_drv_priv(vq);
    + struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd;
    + struct ceu_buffer *buf;
    + unsigned long irqflags;
    +
    + /* Clean and disable interrupt sources. */
    + ceu_write(ceudev, CEU_CETCR,
    + ceu_read(ceudev, CEU_CETCR) & ceudev->irq_mask);
    + ceu_write(ceudev, CEU_CEIER, CEU_CEIER_MASK);
    +
    + v4l2_subdev_call(v4l2_sd, video, s_stream, 0);
    +
    + spin_lock_irqsave(&ceudev->lock, irqflags);
    + if (ceudev->active) {
    + vb2_buffer_done(&ceudev->active->vb2_buf,
    + VB2_BUF_STATE_ERROR);
    + ceudev->active = NULL;
    + }
    +
    + /* Release all queued buffers. */
    + list_for_each_entry(buf, &ceudev->capture, queue)
    + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
    + INIT_LIST_HEAD(&ceudev->capture);
    +
    + spin_unlock_irqrestore(&ceudev->lock, irqflags);
    +
    + ceu_soft_reset(ceudev);
    +}
    +
    +static const struct vb2_ops ceu_vb2_ops = {
    + .queue_setup = ceu_vb2_setup,
    + .buf_queue = ceu_vb2_queue,
    + .buf_prepare = ceu_vb2_prepare,
    + .wait_prepare = vb2_ops_wait_prepare,
    + .wait_finish = vb2_ops_wait_finish,
    + .start_streaming = ceu_start_streaming,
    + .stop_streaming = ceu_stop_streaming,
    +};
    +
    +/* --- CEU image formats handling --- */
    +
    +/*
    + * ceu_try_fmt() - test format on CEU and sensor
    + * @ceudev: The CEU device.
    + * @v4l2_fmt: format to test.
    + *
    + * Returns 0 for success, < 0 for errors.
    + */
    +static int ceu_try_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt)
    +{
    + struct ceu_subdev *ceu_sd = ceudev->sd;
    + struct v4l2_pix_format_mplane *pix = &v4l2_fmt->fmt.pix_mp;
    + struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
    + struct v4l2_subdev_pad_config pad_cfg;
    + const struct ceu_fmt *ceu_fmt;
    + int ret;
    +
    + struct v4l2_subdev_format sd_format = {
    + .which = V4L2_SUBDEV_FORMAT_TRY,
    + };
    +
    + switch (pix->pixelformat) {
    + case V4L2_PIX_FMT_YUYV:
    + case V4L2_PIX_FMT_NV16:
    + case V4L2_PIX_FMT_NV61:
    + case V4L2_PIX_FMT_NV12:
    + case V4L2_PIX_FMT_NV21:
    + break;
    +
    + default:
    + pix->pixelformat = V4L2_PIX_FMT_NV16;
    + break;
    + }
    +
    + ceu_fmt = get_ceu_fmt_from_fourcc(pix->pixelformat);
    +
    + /* CFSZR requires height and width to be 4-pixel aligned. */
    + v4l_bound_align_image(&pix->width, 2, CEU_MAX_WIDTH, 4,
    + &pix->height, 4, CEU_MAX_HEIGHT, 4, 0);
    +
    + /*
    + * Set format on sensor sub device: bus format used to produce memory
    + * format is selected at initialization time.
    + */
    + v4l2_fill_mbus_format_mplane(&sd_format.format, pix);
    + ret = v4l2_subdev_call(v4l2_sd, pad, set_fmt, &pad_cfg, &sd_format);
    + if (ret)
    + return ret;
    +
    + /* Apply size returned by sensor as the CEU can't scale. */
    + v4l2_fill_pix_format_mplane(pix, &sd_format.format);
    +
    + /* Calculate per-plane sizes based on image format. */
    + ceu_calc_plane_sizes(ceudev, ceu_fmt, pix);
    +
    + return 0;
    +}
    +
    +/*
    + * ceu_set_fmt() - Apply the supplied format to both sensor and CEU
    + */
    +static int ceu_set_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt)
    +{
    + struct ceu_subdev *ceu_sd = ceudev->sd;
    + struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
    + int ret;
    +
    + struct v4l2_subdev_format format = {
    + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
    + };
    +
    + ret = ceu_try_fmt(ceudev, v4l2_fmt);
    + if (ret)
    + return ret;
    +
    + v4l2_fill_mbus_format_mplane(&format.format, &v4l2_fmt->fmt.pix_mp);
    + ret = v4l2_subdev_call(v4l2_sd, pad, set_fmt, NULL, &format);
    + if (ret)
    + return ret;
    +
    + ceudev->v4l2_pix = v4l2_fmt->fmt.pix_mp;
    +
    + return 0;
    +}
    +
    +/*
    + * ceu_set_default_fmt() - Apply default NV16 memory output format with VGA
    + * sizes.
    + */
    +static int ceu_set_default_fmt(struct ceu_device *ceudev)
    +{
    + int ret;
    +
    + struct v4l2_format v4l2_fmt = {
    + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE,
    + .fmt.pix_mp = {
    + .width = VGA_WIDTH,
    + .height = VGA_HEIGHT,
    + .field = V4L2_FIELD_NONE,
    + .pixelformat = V4L2_PIX_FMT_NV16,
    + .num_planes = 2,
    + .plane_fmt = {
    + [0] = {
    + .sizeimage = VGA_WIDTH * VGA_HEIGHT * 2,
    + .bytesperline = VGA_WIDTH * 2,
    + },
    + [1] = {
    + .sizeimage = VGA_WIDTH * VGA_HEIGHT * 2,
    + .bytesperline = VGA_WIDTH * 2,
    + },
    + },
    + },
    + };
    +
    + ret = ceu_try_fmt(ceudev, &v4l2_fmt);
    + if (ret)
    + return ret;
    +
    + ceudev->v4l2_pix = v4l2_fmt.fmt.pix_mp;
    +
    + return 0;
    +}
    +
    +/*
    + * ceu_init_formats() - Query sensor for supported formats and initialize
    + * CEU supported format list
    + *
    + * Find out if sensor can produce a permutation of 8-bits YUYV bus format.
    + * From a single 8-bits YUYV bus format the CEU can produce several memory
    + * output formats:
    + * - NV[12|21|16|61] through image fetch mode;
    + * - YUYV422 if sensor provides YUYV422
    + *
    + * TODO: Other YUYV422 permutations through data fetch sync mode and DTARY
    + * TODO: Binary data (eg. JPEG) and raw formats through data fetch sync mode
    + */
    +static int ceu_init_formats(struct ceu_device *ceudev)
    +{
    + struct ceu_subdev *ceu_sd = ceudev->sd;
    + struct ceu_mbus_fmt *mbus_fmt = &ceu_sd->mbus_fmt;
    + struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
    + bool yuyv_bus_fmt = false;
    +
    + struct v4l2_subdev_mbus_code_enum sd_mbus_fmt = {
    + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
    + .index = 0,
    + };
    +
    + /* Find out if sensor can produce any permutation of 8-bits YUYV422. */
    + while (!yuyv_bus_fmt &&
    + !v4l2_subdev_call(v4l2_sd, pad, enum_mbus_code,
    + NULL, &sd_mbus_fmt)) {
    + switch (sd_mbus_fmt.code) {
    + case MEDIA_BUS_FMT_YUYV8_2X8:
    + case MEDIA_BUS_FMT_YVYU8_2X8:
    + case MEDIA_BUS_FMT_UYVY8_2X8:
    + case MEDIA_BUS_FMT_VYUY8_2X8:
    + yuyv_bus_fmt = true;
    + break;
    + default:
    + /*
    + * Only support 8-bits YUYV bus formats at the moment;
    + *
    + * TODO: add support for binary formats (data sync
    + * fetch mode).
    + */
    + break;
    + }
    +
    + sd_mbus_fmt.index++;
    + }
    +
    + if (!yuyv_bus_fmt)
    + return -ENXIO;
    +
    + /*
    + * Save the first encountered YUYV format as "mbus_fmt" and use it
    + * to output all planar YUV422 and YUV420 (NV*) formats to memory as
    + * well as for data synch fetch mode (YUYV - YVYU etc. ).
    + */
    + mbus_fmt->mbus_code = sd_mbus_fmt.code;
    + mbus_fmt->bps = 8;
    +
    + /* Annotate the selected bus format components ordering. */
    + switch (sd_mbus_fmt.code) {
    + case MEDIA_BUS_FMT_YUYV8_2X8:
    + mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_YUYV;
    + mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_YVYU;
    + mbus_fmt->swapped = false;
    + mbus_fmt->bpp = 16;
    + break;
    +
    + case MEDIA_BUS_FMT_YVYU8_2X8:
    + mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_YVYU;
    + mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_YUYV;
    + mbus_fmt->swapped = true;
    + mbus_fmt->bpp = 16;
    + break;
    +
    + case MEDIA_BUS_FMT_UYVY8_2X8:
    + mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_UYVY;
    + mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_VYUY;
    + mbus_fmt->swapped = false;
    + mbus_fmt->bpp = 16;
    + break;
    +
    + case MEDIA_BUS_FMT_VYUY8_2X8:
    + mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_VYUY;
    + mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_UYVY;
    + mbus_fmt->swapped = true;
    + mbus_fmt->bpp = 16;
    + break;
    + }
    +
    + ceudev->field = V4L2_FIELD_NONE;
    +
    + return 0;
    +}
    +
    +/* --- Runtime PM Handlers --- */
    +
    +/*
    + * ceu_runtime_resume() - soft-reset the interface and turn sensor power on.
    + */
    +static int ceu_runtime_resume(struct device *dev)
    +{
    + struct ceu_device *ceudev = dev_get_drvdata(dev);
    + struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd;
    +
    + v4l2_subdev_call(v4l2_sd, core, s_power, 1);
    +
    + ceu_soft_reset(ceudev);
    +
    + return 0;
    +}
    +
    +/*
    + * ceu_runtime_suspend() - disable capture and interrupts and soft-reset.
    + * Turn sensor power off.
    + */
    +static int ceu_runtime_suspend(struct device *dev)
    +{
    + struct ceu_device *ceudev = dev_get_drvdata(dev);
    + struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd;
    +
    + v4l2_subdev_call(v4l2_sd, core, s_power, 0);
    +
    + ceu_write(ceudev, CEU_CEIER, 0);
    + ceu_soft_reset(ceudev);
    +
    + return 0;
    +}
    +
    +/* --- File Operations --- */
    +
    +static int ceu_open(struct file *file)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    + int ret;
    +
    + ret = v4l2_fh_open(file);
    + if (ret)
    + return ret;
    +
    + mutex_lock(&ceudev->mlock);
    + /* Causes soft-reset and sensor power on on first open */
    + pm_runtime_get_sync(ceudev->dev);
    + mutex_unlock(&ceudev->mlock);
    +
    + return 0;
    +}
    +
    +static int ceu_release(struct file *file)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    +
    + vb2_fop_release(file);
    +
    + mutex_lock(&ceudev->mlock);
    + /* Causes soft-reset and sensor power down on last close */
    + pm_runtime_put(ceudev->dev);
    + mutex_unlock(&ceudev->mlock);
    +
    + return 0;
    +}
    +
    +static const struct v4l2_file_operations ceu_fops = {
    + .owner = THIS_MODULE,
    + .open = ceu_open,
    + .release = ceu_release,
    + .unlocked_ioctl = video_ioctl2,
    + .mmap = vb2_fop_mmap,
    + .poll = vb2_fop_poll,
    +};
    +
    +/* --- Video Device IOCTLs --- */
    +
    +static int ceu_querycap(struct file *file, void *priv,
    + struct v4l2_capability *cap)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    +
    + strlcpy(cap->card, "Renesas CEU", sizeof(cap->card));
    + strlcpy(cap->driver, DRIVER_NAME, sizeof(cap->driver));
    + snprintf(cap->bus_info, sizeof(cap->bus_info),
    + "platform:renesas-ceu-%s", dev_name(ceudev->dev));
    +
    + return 0;
    +}
    +
    +static int ceu_enum_fmt_vid_cap(struct file *file, void *priv,
    + struct v4l2_fmtdesc *f)
    +{
    + const struct ceu_fmt *fmt;
    +
    + if (f->index >= ARRAY_SIZE(ceu_fmt_list))
    + return -EINVAL;
    +
    + fmt = &ceu_fmt_list[f->index];
    + f->pixelformat = fmt->fourcc;
    +
    + return 0;
    +}
    +
    +static int ceu_try_fmt_vid_cap(struct file *file, void *priv,
    + struct v4l2_format *f)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    +
    + return ceu_try_fmt(ceudev, f);
    +}
    +
    +static int ceu_s_fmt_vid_cap(struct file *file, void *priv,
    + struct v4l2_format *f)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    +
    + if (vb2_is_streaming(&ceudev->vb2_vq))
    + return -EBUSY;
    +
    + return ceu_set_fmt(ceudev, f);
    +}
    +
    +static int ceu_g_fmt_vid_cap(struct file *file, void *priv,
    + struct v4l2_format *f)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    +
    + f->fmt.pix_mp = ceudev->v4l2_pix;
    +
    + return 0;
    +}
    +
    +static int ceu_enum_input(struct file *file, void *priv,
    + struct v4l2_input *inp)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    + struct ceu_subdev *ceusd;
    +
    + if (inp->index >= ceudev->num_sd)
    + return -EINVAL;
    +
    + ceusd = &ceudev->subdevs[inp->index];
    +
    + inp->type = V4L2_INPUT_TYPE_CAMERA;
    + inp->std = 0;
    + snprintf(inp->name, sizeof(inp->name), "Camera%u: %s",
    + inp->index, ceusd->v4l2_sd->name);
    +
    + return 0;
    +}
    +
    +static int ceu_g_input(struct file *file, void *priv, unsigned int *i)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    +
    + *i = ceudev->sd_index;
    +
    + return 0;
    +}
    +
    +static int ceu_s_input(struct file *file, void *priv, unsigned int i)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    + struct ceu_subdev *ceu_sd_old;
    + int ret;
    +
    + if (i >= ceudev->num_sd)
    + return -EINVAL;
    +
    + if (vb2_is_streaming(&ceudev->vb2_vq))
    + return -EBUSY;
    +
    + if (i == ceudev->sd_index)
    + return 0;
    +
    + ceu_sd_old = ceudev->sd;
    + ceudev->sd = &ceudev->subdevs[i];
    +
    + /* Make sure we can generate output image formats. */
    + ret = ceu_init_formats(ceudev);
    + if (ret) {
    + ceudev->sd = ceu_sd_old;
    + return -EINVAL;
    + }
    +
    + /* now that we're sure we can use the sensor, power off the old one. */
    + v4l2_subdev_call(ceu_sd_old->v4l2_sd, core, s_power, 0);
    + v4l2_subdev_call(ceudev->sd->v4l2_sd, core, s_power, 1);
    +
    + ceudev->sd_index = i;
    +
    + return 0;
    +}
    +
    +static int ceu_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    +
    + return v4l2_g_parm_cap(video_devdata(file), ceudev->sd->v4l2_sd, a);
    +}
    +
    +static int ceu_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    +
    + return v4l2_s_parm_cap(video_devdata(file), ceudev->sd->v4l2_sd, a);
    +}
    +
    +static int ceu_enum_framesizes(struct file *file, void *fh,
    + struct v4l2_frmsizeenum *fsize)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    + struct ceu_subdev *ceu_sd = ceudev->sd;
    + const struct ceu_fmt *ceu_fmt;
    + struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
    + int ret;
    +
    + struct v4l2_subdev_frame_size_enum fse = {
    + .code = ceu_sd->mbus_fmt.mbus_code,
    + .index = fsize->index,
    + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
    + };
    +
    + /* Just check if user supplied pixel format is supported. */
    + ceu_fmt = get_ceu_fmt_from_fourcc(fsize->pixel_format);
    + if (!ceu_fmt)
    + return -EINVAL;
    +
    + ret = v4l2_subdev_call(v4l2_sd, pad, enum_frame_size,
    + NULL, &fse);
    + if (ret)
    + return ret;
    +
    + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
    + fsize->discrete.width = CEU_W_MAX(fse.max_width);
    + fsize->discrete.height = CEU_H_MAX(fse.max_height);
    +
    + return 0;
    +}
    +
    +static int ceu_enum_frameintervals(struct file *file, void *fh,
    + struct v4l2_frmivalenum *fival)
    +{
    + struct ceu_device *ceudev = video_drvdata(file);
    + struct ceu_subdev *ceu_sd = ceudev->sd;
    + const struct ceu_fmt *ceu_fmt;
    + struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd;
    + int ret;
    +
    + struct v4l2_subdev_frame_interval_enum fie = {
    + .code = ceu_sd->mbus_fmt.mbus_code,
    + .index = fival->index,
    + .width = fival->width,
    + .height = fival->height,
    + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
    + };
    +
    + /* Just check if user supplied pixel format is supported. */
    + ceu_fmt = get_ceu_fmt_from_fourcc(fival->pixel_format);
    + if (!ceu_fmt)
    + return -EINVAL;
    +
    + ret = v4l2_subdev_call(v4l2_sd, pad, enum_frame_interval, NULL,
    + &fie);
    + if (ret)
    + return ret;
    +
    + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
    + fival->discrete = fie.interval;
    +
    + return 0;
    +}
    +
    +static const struct v4l2_ioctl_ops ceu_ioctl_ops = {
    + .vidioc_querycap = ceu_querycap,
    +
    + .vidioc_enum_fmt_vid_cap_mplane = ceu_enum_fmt_vid_cap,
    + .vidioc_try_fmt_vid_cap_mplane = ceu_try_fmt_vid_cap,
    + .vidioc_s_fmt_vid_cap_mplane = ceu_s_fmt_vid_cap,
    + .vidioc_g_fmt_vid_cap_mplane = ceu_g_fmt_vid_cap,
    +
    + .vidioc_enum_input = ceu_enum_input,
    + .vidioc_g_input = ceu_g_input,
    + .vidioc_s_input = ceu_s_input,
    +
    + .vidioc_reqbufs = vb2_ioctl_reqbufs,
    + .vidioc_querybuf = vb2_ioctl_querybuf,
    + .vidioc_qbuf = vb2_ioctl_qbuf,
    + .vidioc_expbuf = vb2_ioctl_expbuf,
    + .vidioc_dqbuf = vb2_ioctl_dqbuf,
    + .vidioc_create_bufs = vb2_ioctl_create_bufs,
    + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
    + .vidioc_streamon = vb2_ioctl_streamon,
    + .vidioc_streamoff = vb2_ioctl_streamoff,
    +
    + .vidioc_g_parm = ceu_g_parm,
    + .vidioc_s_parm = ceu_s_parm,
    + .vidioc_enum_framesizes = ceu_enum_framesizes,
    + .vidioc_enum_frameintervals = ceu_enum_frameintervals,
    +
    + .vidioc_log_status = v4l2_ctrl_log_status,
    + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
    + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
    +};
    +
    +/*
    + * ceu_vdev_release() - release CEU video device memory when last reference
    + * to this driver is closed
    + */
    +static void ceu_vdev_release(struct video_device *vdev)
    +{
    + struct ceu_device *ceudev = video_get_drvdata(vdev);
    +
    + kfree(ceudev);
    +}
    +
    +static int ceu_notify_bound(struct v4l2_async_notifier *notifier,
    + struct v4l2_subdev *v4l2_sd,
    + struct v4l2_async_subdev *asd)
    +{
    + struct v4l2_device *v4l2_dev = notifier->v4l2_dev;
    + struct ceu_device *ceudev = v4l2_to_ceu(v4l2_dev);
    + struct ceu_subdev *ceu_sd = to_ceu_subdev(asd);
    +
    + ceu_sd->v4l2_sd = v4l2_sd;
    + ceudev->num_sd++;
    +
    + return 0;
    +}
    +
    +static int ceu_notify_complete(struct v4l2_async_notifier *notifier)
    +{
    + struct v4l2_device *v4l2_dev = notifier->v4l2_dev;
    + struct ceu_device *ceudev = v4l2_to_ceu(v4l2_dev);
    + struct video_device *vdev = &ceudev->vdev;
    + struct vb2_queue *q = &ceudev->vb2_vq;
    + struct v4l2_subdev *v4l2_sd;
    + int ret;
    +
    + /* Initialize vb2 queue. */
    + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
    + q->io_modes = VB2_MMAP | VB2_DMABUF;
    + q->drv_priv = ceudev;
    + q->ops = &ceu_vb2_ops;
    + q->mem_ops = &vb2_dma_contig_memops;
    + q->buf_struct_size = sizeof(struct ceu_buffer);
    + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
    + q->min_buffers_needed = 2;
    + q->lock = &ceudev->mlock;
    + q->dev = ceudev->v4l2_dev.dev;
    +
    + ret = vb2_queue_init(q);
    + if (ret)
    + return ret;
    +
    + /*
    + * Make sure at least one sensor is primary and use it to initialize
    + * ceu formats.
    + */
    + if (!ceudev->sd) {
    + ceudev->sd = &ceudev->subdevs[0];
    + ceudev->sd_index = 0;
    + }
    +
    + v4l2_sd = ceudev->sd->v4l2_sd;
    +
    + ret = ceu_init_formats(ceudev);
    + if (ret)
    + return ret;
    +
    + ret = ceu_set_default_fmt(ceudev);
    + if (ret)
    + return ret;
    +
    + /* Register the video device. */
    + strncpy(vdev->name, DRIVER_NAME, strlen(DRIVER_NAME));
    + vdev->v4l2_dev = v4l2_dev;
    + vdev->lock = &ceudev->mlock;
    + vdev->queue = &ceudev->vb2_vq;
    + vdev->ctrl_handler = v4l2_sd->ctrl_handler;
    + vdev->fops = &ceu_fops;
    + vdev->ioctl_ops = &ceu_ioctl_ops;
    + vdev->release = ceu_vdev_release;
    + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE |
    + V4L2_CAP_STREAMING;
    + video_set_drvdata(vdev, ceudev);
    +
    + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
    + if (ret < 0) {
    + v4l2_err(vdev->v4l2_dev,
    + "video_register_device failed: %d\n", ret);
    + return ret;
    + }
    +
    + return 0;
    +}
    +
    +static const struct v4l2_async_notifier_operations ceu_notify_ops = {
    + .bound = ceu_notify_bound,
    + .complete = ceu_notify_complete,
    +};
    +
    +/*
    + * ceu_init_async_subdevs() - Initialize CEU subdevices and async_subdevs in
    + * ceu device. Both DT and platform data parsing use
    + * this routine.
    + *
    + * Returns 0 for success, -ENOMEM for failure.
    + */
    +static int ceu_init_async_subdevs(struct ceu_device *ceudev, unsigned int n_sd)
    +{
    + /* Reserve memory for 'n_sd' ceu_subdev descriptors. */
    + ceudev->subdevs = devm_kcalloc(ceudev->dev, n_sd,
    + sizeof(*ceudev->subdevs), GFP_KERNEL);
    + if (!ceudev->subdevs)
    + return -ENOMEM;
    +
    + /*
    + * Reserve memory for 'n_sd' pointers to async_subdevices.
    + * ceudev->asds members will point to &ceu_subdev.asd
    + */
    + ceudev->asds = devm_kcalloc(ceudev->dev, n_sd,
    + sizeof(*ceudev->asds), GFP_KERNEL);
    + if (!ceudev->asds)
    + return -ENOMEM;
    +
    + ceudev->sd = NULL;
    + ceudev->sd_index = 0;
    + ceudev->num_sd = 0;
    +
    + return 0;
    +}
    +
    +/*
    + * ceu_parse_platform_data() - Initialize async_subdevices using platform
    + * device provided data.
    + */
    +static int ceu_parse_platform_data(struct ceu_device *ceudev,
    + const struct ceu_platform_data *pdata)
    +{
    + const struct ceu_async_subdev *async_sd;
    + struct ceu_subdev *ceu_sd;
    + unsigned int i;
    + int ret;
    +
    + if (pdata->num_subdevs == 0)
    + return -ENODEV;
    +
    + ret = ceu_init_async_subdevs(ceudev, pdata->num_subdevs);
    + if (ret)
    + return ret;
    +
    + for (i = 0; i < pdata->num_subdevs; i++) {
    + /* Setup the ceu subdevice and the async subdevice. */
    + async_sd = &pdata->subdevs[i];
    + ceu_sd = &ceudev->subdevs[i];
    +
    + INIT_LIST_HEAD(&ceu_sd->asd.list);
    +
    + ceu_sd->mbus_flags = async_sd->flags;
    + ceu_sd->asd.match_type = V4L2_ASYNC_MATCH_I2C;
    + ceu_sd->asd.match.i2c.adapter_id = async_sd->i2c_adapter_id;
    + ceu_sd->asd.match.i2c.address = async_sd->i2c_address;
    +
    + ceudev->asds[i] = &ceu_sd->asd;
    + }
    +
    + return pdata->num_subdevs;
    +}
    +
    +/*
    + * ceu_parse_dt() - Initialize async_subdevs parsing device tree graph.
    + */
    +static int ceu_parse_dt(struct ceu_device *ceudev)
    +{
    + struct device_node *of = ceudev->dev->of_node;
    + struct v4l2_fwnode_endpoint fw_ep;
    + struct ceu_subdev *ceu_sd;
    + struct device_node *ep;
    + unsigned int i;
    + int num_ep;
    + int ret;
    +
    + num_ep = of_graph_get_endpoint_count(of);
    + if (!num_ep)
    + return -ENODEV;
    +
    + ret = ceu_init_async_subdevs(ceudev, num_ep);
    + if (ret)
    + return ret;
    +
    + for (i = 0; i < num_ep; i++) {
    + ep = of_graph_get_endpoint_by_regs(of, 0, i);
    + if (!ep) {
    + dev_err(ceudev->dev,
    + "No subdevice connected on endpoint %u.\n", i);
    + ret = -ENODEV;
    + goto error_put_node;
    + }
    +
    + ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &fw_ep);
    + if (ret) {
    + dev_err(ceudev->dev,
    + "Unable to parse endpoint #%u.\n", i);
    + goto error_put_node;
    + }
    +
    + if (fw_ep.bus_type != V4L2_MBUS_PARALLEL) {
    + dev_err(ceudev->dev,
    + "Only parallel input supported.\n");
    + ret = -EINVAL;
    + goto error_put_node;
    + }
    +
    + /* Setup the ceu subdevice and the async subdevice. */
    + ceu_sd = &ceudev->subdevs[i];
    + INIT_LIST_HEAD(&ceu_sd->asd.list);
    +
    + ceu_sd->mbus_flags = fw_ep.bus.parallel.flags;
    + ceu_sd->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
    + ceu_sd->asd.match.fwnode =
    + fwnode_graph_get_remote_port_parent(
    + of_fwnode_handle(ep));
    +
    + ceudev->asds[i] = &ceu_sd->asd;
    + of_node_put(ep);
    + }
    +
    + return num_ep;
    +
    +error_put_node:
    + of_node_put(ep);
    + return ret;
    +}
    +
    +/*
    + * struct ceu_data - Platform specific CEU data
    + * @irq_mask: CETCR mask with all interrupt sources enabled. The mask differs
    + * between SH4 and RZ platforms.
    + */
    +struct ceu_data {
    + u32 irq_mask;
    +};
    +
    +static const struct ceu_data ceu_data_rz = {
    + .irq_mask = CEU_CETCR_ALL_IRQS_RZ,
    +};
    +
    +static const struct ceu_data ceu_data_sh4 = {
    + .irq_mask = CEU_CETCR_ALL_IRQS_SH4,
    +};
    +
    +#if IS_ENABLED(CONFIG_OF)
    +static const struct of_device_id ceu_of_match[] = {
    + { .compatible = "renesas,r7s72100-ceu", .data = &ceu_data_rz },
    + { }
    +};
    +MODULE_DEVICE_TABLE(of, ceu_of_match);
    +#endif
    +
    +static int ceu_probe(struct platform_device *pdev)
    +{
    + struct device *dev = &pdev->dev;
    + const struct ceu_data *ceu_data;
    + struct ceu_device *ceudev;
    + struct resource *res;
    + unsigned int irq;
    + int num_subdevs;
    + int ret;
    +
    + ceudev = kzalloc(sizeof(*ceudev), GFP_KERNEL);
    + if (!ceudev)
    + return -ENOMEM;
    +
    + platform_set_drvdata(pdev, ceudev);
    + ceudev->dev = dev;
    +
    + INIT_LIST_HEAD(&ceudev->capture);
    + spin_lock_init(&ceudev->lock);
    + mutex_init(&ceudev->mlock);
    +
    + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
    + ceudev->base = devm_ioremap_resource(dev, res);
    + if (IS_ERR(ceudev->base))
    + goto error_free_ceudev;
    +
    + ret = platform_get_irq(pdev, 0);
    + if (ret < 0) {
    + dev_err(dev, "Failed to get irq: %d\n", ret);
    + goto error_free_ceudev;
    + }
    + irq = ret;
    +
    + ret = devm_request_irq(dev, irq, ceu_irq,
    + 0, dev_name(dev), ceudev);
    + if (ret) {
    + dev_err(&pdev->dev, "Unable to request CEU interrupt.\n");
    + goto error_free_ceudev;
    + }
    +
    + pm_runtime_enable(dev);
    +
    + ret = v4l2_device_register(dev, &ceudev->v4l2_dev);
    + if (ret)
    + goto error_pm_disable;
    +
    + if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
    + ceu_data = of_match_device(ceu_of_match, dev)->data;
    + num_subdevs = ceu_parse_dt(ceudev);
    + } else if (dev->platform_data) {
    + /* Assume SH4 if booting with platform data. */
    + ceu_data = &ceu_data_sh4;
    + num_subdevs = ceu_parse_platform_data(ceudev,
    + dev->platform_data);
    + } else {
    + num_subdevs = -EINVAL;
    + }
    +
    + if (num_subdevs < 0) {
    + ret = num_subdevs;
    + goto error_v4l2_unregister;
    + }
    + ceudev->irq_mask = ceu_data->irq_mask;
    +
    + ceudev->notifier.v4l2_dev = &ceudev->v4l2_dev;
    + ceudev->notifier.subdevs = ceudev->asds;
    + ceudev->notifier.num_subdevs = num_subdevs;
    + ceudev->notifier.ops = &ceu_notify_ops;
    + ret = v4l2_async_notifier_register(&ceudev->v4l2_dev,
    + &ceudev->notifier);
    + if (ret)
    + goto error_v4l2_unregister;
    +
    + dev_info(dev, "Renesas Capture Engine Unit %s\n", dev_name(dev));
    +
    + return 0;
    +
    +error_v4l2_unregister:
    + v4l2_device_unregister(&ceudev->v4l2_dev);
    +error_pm_disable:
    + pm_runtime_disable(dev);
    +error_free_ceudev:
    + kfree(ceudev);
    +
    + return ret;
    +}
    +
    +static int ceu_remove(struct platform_device *pdev)
    +{
    + struct ceu_device *ceudev = platform_get_drvdata(pdev);
    +
    + pm_runtime_disable(ceudev->dev);
    +
    + v4l2_async_notifier_unregister(&ceudev->notifier);
    +
    + v4l2_device_unregister(&ceudev->v4l2_dev);
    +
    + video_unregister_device(&ceudev->vdev);
    +
    + return 0;
    +}
    +
    +static const struct dev_pm_ops ceu_pm_ops = {
    + SET_RUNTIME_PM_OPS(ceu_runtime_suspend,
    + ceu_runtime_resume,
    + NULL)
    +};
    +
    +static struct platform_driver ceu_driver = {
    + .driver = {
    + .name = DRIVER_NAME,
    + .pm = &ceu_pm_ops,
    + .of_match_table = of_match_ptr(ceu_of_match),
    + },
    + .probe = ceu_probe,
    + .remove = ceu_remove,
    +};
    +
    +module_platform_driver(ceu_driver);
    +
    +MODULE_DESCRIPTION("Renesas CEU camera driver");
    +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org>");
    +MODULE_LICENSE("GPL v2");
    --
    2.7.4
    \
     
     \ /
      Last update: 2018-01-30 11:05    [W:5.476 / U:0.168 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site