lkml.org 
[lkml]   [2018]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] sound/tlv320dac33: Add device tree support
On Tue 2018-01-30 00:20:31, Ladislav Michl wrote:
> On Tue, Jan 30, 2018 at 12:05:39AM +0100, Pavel Machek wrote:
> >
> > This adds device tree support to tlv320dac33.c.
> >
> > Signed-off-by: Pavel Machek <pavel@ucw.cz>
> >
> > diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
> > new file mode 100644
> > index 0000000..6cbd311
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
> > @@ -0,0 +1,32 @@
> > +Texas Instruments - tlv320dac33 Codec module
> > +
> > +The tlv320dac33 serial control bus communicates through I2C protocols.
> > +
> > +Required properties:
> > +
> > +- compatible - "ti,tlv320dac33"
> > +- reg - I2C slave address
> > +
> > +Optional properties:
> > +
> > +- power-gpios - gpio pin to power the device, active high
>
> While driver used gpio in platform data, isn't it more likely
> regulator which powers device?

power-gpios = <&gpio2 28 0>; /* gpio_60 */

Looks like GPIO to me -- example is from Nokia N9. So this appears to
be correct.

Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-01-30 00:33    [W:0.189 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site