lkml.org 
[lkml]   [2018]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [linux-sunxi] [PATCH 16/16] arm: dts: sun8i: a83t: add thermal zone to A83T
From
Date
On 01/26/18 09:19, Philipp Rossak wrote:
> This patch adds the thermal zones to the A83T. Sensor 0 is located in the
> cpu cluster 0. Sensor 1 is located in cluster 1 and Sensor 3 is located
> in the gpu.

You mention sensor 3 here, but have sensor 2 in the device tree.

> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
> ---
> arch/arm/boot/dts/sun8i-a83t.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index 9e53ff5ac4ed..4259a8726031 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -747,4 +747,24 @@
> #size-cells = <0>;
> };
> };
> +
> + thermal-zones {
> + cpu0_thermal: cpu0-thermal {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&ths 0>;
> + };
> +
> + cpu1_thermal: cpu1-thermal {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&ths 1>;
> + };
> +
> + gpu_thermal: gpu-thermal {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&ths 2>;

^^^^ here

> + };
> + };
> };
>

Thanks,
Samuel

\
 
 \ /
  Last update: 2018-01-26 17:25    [W:0.219 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site