lkml.org 
[lkml]   [2018]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 10/15] MIPS: ingenic: Add machine info for supported boards
Hi PrasannaKumar,

Le mar. 2 janv. 2018 à 17:02, PrasannaKumar Muralidharan
<prasannatsmkumar@gmail.com> a écrit :
> Hi Paul,
>
> On 2 January 2018 at 20:38, Paul Cercueil <paul@crapouillou.net>
> wrote:
>> This makes sure that 'mips_machtype' will be initialized to the SoC
>> version used on the board.
>>
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>> arch/mips/Kconfig | 1 +
>> arch/mips/jz4740/Makefile | 2 +-
>> arch/mips/jz4740/boards.c | 12 ++++++++++++
>> arch/mips/jz4740/setup.c | 34 +++++++++++++++++++++++++++++-----
>> 4 files changed, 43 insertions(+), 6 deletions(-)
>> create mode 100644 arch/mips/jz4740/boards.c
>>
>> v2: No change
>> v3: No change
>> v4: No change
>> v5: Use SPDX license identifier
>>
>> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
>> index 350a990fc719..83243e427e36 100644
>> --- a/arch/mips/Kconfig
>> +++ b/arch/mips/Kconfig
>> @@ -376,6 +376,7 @@ config MACH_INGENIC
>> select BUILTIN_DTB
>> select USE_OF
>> select LIBFDT
>> + select MIPS_MACHINE
>>
>> config LANTIQ
>> bool "Lantiq based platforms"
>> diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
>> index 88d6aa7d000b..fc2d3b3c4a80 100644
>> --- a/arch/mips/jz4740/Makefile
>> +++ b/arch/mips/jz4740/Makefile
>> @@ -6,7 +6,7 @@
>> # Object file lists.
>>
>> obj-y += prom.o time.o reset.o setup.o \
>> - platform.o timer.o
>> + platform.o timer.o boards.o
>>
>> CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
>>
>> diff --git a/arch/mips/jz4740/boards.c b/arch/mips/jz4740/boards.c
>> new file mode 100644
>> index 000000000000..13b0bddd8cb7
>> --- /dev/null
>> +++ b/arch/mips/jz4740/boards.c
>> @@ -0,0 +1,12 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Ingenic boards support
>> + * Copyright 2017, Paul Cercueil <paul@crapouillou.net>
>> + */
>> +
>> +#include <asm/bootinfo.h>
>> +#include <asm/mips_machine.h>
>> +
>> +MIPS_MACHINE(MACH_INGENIC_JZ4740, "qi,lb60", "Qi Hardware Ben
>> Nanonote", NULL);
>> +MIPS_MACHINE(MACH_INGENIC_JZ4780, "img,ci20",
>> + "Imagination Technologies CI20", NULL);
>> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
>> index 6d0152321819..afd84ee966e8 100644
>> --- a/arch/mips/jz4740/setup.c
>> +++ b/arch/mips/jz4740/setup.c
>> @@ -22,6 +22,7 @@
>> #include <linux/of_fdt.h>
>>
>> #include <asm/bootinfo.h>
>> +#include <asm/mips_machine.h>
>> #include <asm/prom.h>
>>
>> #include <asm/mach-jz4740/base.h>
>> @@ -53,16 +54,34 @@ static void __init jz4740_detect_mem(void)
>> add_memory_region(0, size, BOOT_MEM_RAM);
>> }
>>
>> +static unsigned long __init get_board_mach_type(const void *fdt)
>> +{
>> + const struct mips_machine *mach;
>> +
>> + for (mach = (struct mips_machine *)&__mips_machines_start;
>> + mach < (struct mips_machine
>> *)&__mips_machines_end;
>> + mach++) {
>> + if (!fdt_node_check_compatible(fdt, 0,
>> mach->mach_id))
>> + return mach->mach_type;
>> + }
>> +
>> + return MACH_INGENIC_JZ4740;
>> +}
>> +
>> void __init plat_mem_setup(void)
>> {
>> int offset;
>>
>> + if (!early_init_dt_scan(__dtb_start))
>> + return;
>> +
>> jz4740_reset_init();
>> - __dt_setup_arch(__dtb_start);
>>
>> offset = fdt_path_offset(__dtb_start, "/memory");
>> if (offset < 0)
>> jz4740_detect_mem();
>> +
>> + mips_machtype = get_board_mach_type(__dtb_start);
>> }
>>
>> void __init device_tree_init(void)
>> @@ -75,13 +94,18 @@ void __init device_tree_init(void)
>>
>> const char *get_system_type(void)
>> {
>> - if (IS_ENABLED(CONFIG_MACH_JZ4780))
>> - return "JZ4780";
>> -
>> - return "JZ4740";
>> + return mips_get_machine_name();
>> }
>>
>> void __init arch_init_irq(void)
>> {
>> irqchip_init();
>> }
>> +
>> +static int __init jz4740_machine_setup(void)
>> +{
>> + mips_machine_setup();
>> +
>> + return 0;
>> +}
>> +arch_initcall(jz4740_machine_setup);
>> --
>> 2.11.0
>>
>>
>
> Why add another file in arch/mips/jz4740/? I think declaring a machine
> and compatible string in dts would suffice. Please feel free to
> correct me if I am wrong.
>
> Regards,
> PrasannaKumar

The point of this commit is, first, to have a textual description of
the board
that can then be retrieved in dmesg; then, to properly initialize the
mips_machtype early in the boot process. I think you are right and we
could
have both things just with "model" and "compatible" nodes in devicetree.

Regards,
-Paul

\
 
 \ /
  Last update: 2018-01-02 17:32    [W:0.060 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site