lkml.org 
[lkml]   [2018]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
Hi Rafael,

On Tue, Jan 2, 2018 at 11:32 AM, Rafael J. Wysocki <rafael@kernel.org> wrote:
> On Fri, Dec 29, 2017 at 2:31 PM, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>> From: Geert Uytterhoeven <geert+renesas@glider.be>
>>
>> Since commit ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable
>> when wake-up is enabled"), when a GPIO is used for wakeup, the GPIO block's
>> module clock (if exists) is manually kept running during system suspend, to
>> make sure the device stays active.
>>
>> However, this explicit clock handling is merely a workaround for a failure
>> to properly communicate wakeup information to the PM core. Instead, set the
>> WAKEUP_PATH driver PM flag to indicate that the device is part of the
>> wakeup path, which further also enables middle-layers and PM domains (like
>> genpd) to act on this.
>>
>> In case the device is attached to genpd and depending on if it has an
>> active wakeup configuration, genpd will keep the device active (the clock
>> running) during system suspend when needed. This enables us to remove all
>> explicit clock handling code from the driver, so let's do that as well.
>>
>> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
>> [Ulf: Converted to use the WAKEUP_PATH driver PM flag]

Ulf: + killing the DEV_PM_OPS define, increasing kernel size if PM_SUSPEND=n?

>> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

>> --- a/drivers/gpio/gpio-rcar.c
>> +++ b/drivers/gpio/gpio-rcar.c

>> @@ -415,6 +402,18 @@ static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins)
>> return 0;
>> }
>>
>> +#ifdef CONFIG_PM_SLEEP
>> +static int gpio_rcar_suspend(struct device *dev)
>> +{
>> + struct gpio_rcar_priv *p = dev_get_drvdata(dev);
>> +
>> + dev_pm_set_driver_flags(dev, p->wakeup_path ? DPM_FLAG_WAKEUP_PATH : 0);
>
> Why don't you simply set dev->power.wakeup_path here?

That's what my v1 did (https://patchwork.kernel.org/patch/10050995/).

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2018-01-02 11:45    [W:0.130 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site