lkml.org 
[lkml]   [2018]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/7] PCI: Regroup all PCI related entries into drivers/pci/Makefile
Date
Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries
from drivers/Makefile into drivers/pci/Makefile.

Since we don't want to introduce any dependency between CONFIG_PCI and
CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile.

Hence all Makefiles in drivers/pci/ were updated accordingly so no file is
compiled when CONFIG_PCI is not defined.

Also, we add a comment to reinforce that EPC and EPF libraries must be
initialized before their users. Hence built-in EPC drivers, such as
those of Designware, are linked after the endpoint core libraries.

Finally, we add another comment to explain why obj-y has been chosen
instead of obj-$(CONFIG_PCIE_DW) to parse the dwc/ sub-folder.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
---
drivers/Makefile | 5 +----
drivers/pci/Kconfig | 1 +
drivers/pci/Makefile | 13 ++++++++++---
drivers/pci/dwc/Makefile | 2 ++
drivers/pci/host/Makefile | 2 ++
5 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index e06f7f633f73..8189b1edec00 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -16,10 +16,7 @@ obj-$(CONFIG_PINCTRL) += pinctrl/
obj-$(CONFIG_GPIOLIB) += gpio/
obj-y += pwm/

-obj-$(CONFIG_PCI) += pci/
-obj-$(CONFIG_PCI_ENDPOINT) += pci/endpoint/
-# PCI dwc controller drivers
-obj-y += pci/dwc/
+obj-y += pci/

obj-$(CONFIG_PARISC) += parisc/
obj-$(CONFIG_RAPIDIO) += rapidio/
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index bda151788f3f..7eeb969ab86a 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -125,6 +125,7 @@ config PCI_PASID

config PCI_LABEL
def_bool y if (DMI || ACPI)
+ depends on PCI
select NLS

config PCI_HYPERV
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index c7819b973df7..ddb5aa6640d7 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -3,12 +3,15 @@
# Makefile for the PCI bus specific drivers.
#

-obj-y += access.o bus.o probe.o host-bridge.o remove.o pci.o \
+obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o remove.o pci.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
irq.o vpd.o setup-bus.o vc.o mmap.o setup-irq.o

+ifdef CONFIG_PCI
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_SYSFS) += slot.o
+obj-$(CONFIG_OF) += of.o
+endif

obj-$(CONFIG_PCI_QUIRKS) += quirks.o

@@ -44,10 +47,14 @@ obj-$(CONFIG_PCI_ECAM) += ecam.o

obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o

-obj-$(CONFIG_OF) += of.o
-
ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG

# PCI host controller drivers
obj-y += host/
obj-y += switch/
+
+obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
+
+# Endpoint library must be initialized before its users
+# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
+obj-y += dwc/
diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
index a9d8a6fb48e3..5d2ce72c7a52 100644
--- a/drivers/pci/dwc/Makefile
+++ b/drivers/pci/dwc/Makefile
@@ -25,4 +25,6 @@ obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
# ARM64 and use internal ifdefs to only build the pieces we need
# depending on whether ACPI, the DT driver, or both are enabled.

+ifdef CONFIG_PCI
obj-$(CONFIG_ARM64) += pcie-hisi.o
+endif
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 34ec1d88f961..3b1059190867 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -34,6 +34,8 @@ obj-$(CONFIG_VMD) += vmd.o
# ARM64 and use internal ifdefs to only build the pieces we need
# depending on whether ACPI, the DT driver, or both are enabled.

+ifdef CONFIG_PCI
obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
obj-$(CONFIG_ARM64) += pci-thunder-pem.o
obj-$(CONFIG_ARM64) += pci-xgene.o
+endif
--
2.11.0
\
 
 \ /
  Last update: 2018-01-19 00:01    [W:0.057 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site