lkml.org 
[lkml]   [2018]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] usb: dwc3: core: power on PHYs before initializing core
2018-01-17 22:46 GMT+01:00 Brian Norris <briannorris@chromium.org>:
> On Fri, Jan 12, 2018 at 12:00:16PM +0800, William Wu wrote:
>> The dwc3_core_init() gets the PHYs and initializes the PHYs with
>> the usb_phy_init() and phy_init() functions before initializing
>> core, and power on the PHYs after core initialization is done.
>>
>> However, some platforms (e.g. Rockchip RK3399 DWC3 with Type-C
>> USB3 PHY), it needs to do some special operation while power on
>> the Type-C PHY before initializing DWC3 core. It's because that
>> the RK3399 Type-C PHY requires to hold the DWC3 controller in
>> reset state to keep the PIPE power state in P2 while configuring
>> the Type-C PHY, otherwise, it may cause waiting for the PIPE ready
>> timeout. In this case, if we power on the PHYs after the DWC3 core
>> initialization is done, the core will be reset to uninitialized
>> state after power on the PHYs.
>>
>> Fix this by powering on the PHYs before initializing core. And
>> because the GUID register may also be reset in this case, so we
>> need to configure the GUID register after powering on the PHYs.
>>
>> Signed-off-by: William Wu <william.wu@rock-chips.com>
>
> This kinda should be part of your series:
>
> [PATCH 0/3] Reset USB3 controller before initializing Type-C PHY on rk3399
>

+1

> or at least mentioned there, because the series there doesn't quite
> right otherwise, no?
>
> Anyway, I think this patch looks OK. I don't immediately see good
> reasons for delaying the PHY init until later, and I do see reasons why
> it could be useful earlier:
>
> Reviewed-by: Brian Norris <briannorris@chromium.org>

Tested on Samsung Chromebook Plus with current mainline

Tested-by: Enric Balletbo i Serra <enric.balletbo@chromium.org>

>
>> ---
>> drivers/usb/dwc3/core.c | 46 ++++++++++++++++++++++------------------------
>> 1 file changed, 22 insertions(+), 24 deletions(-)

\
 
 \ /
  Last update: 2018-01-18 17:51    [W:0.068 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site