lkml.org 
[lkml]   [2018]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: lpc3250: fix uda1380 gpio numbers
On Wed, Jan 10, 2018 at 5:22 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> dtc warns about obviously incorrect GPIO numbers for the audio codec
> on both lpc32xx boards:
>
> arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
> arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
> arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
> arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
>
> It looks like the nodes are written for a different binding that combines
> the GPIO number into a single number rather than a bank/number pair.
> I found the right numbers on stackexchange.com, so this patch fixes
> the warning and has a reasonable chance of getting things to actually
> work.
>
> Link: https://unix.stackexchange.com/questions/59497/alsa-asoc-how-to-correctly-load-devices-drivers/62217#62217
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

I've applied this to the next/dt branch now.

Arnd

\
 
 \ /
  Last update: 2018-01-15 13:58    [W:0.035 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site