lkml.org 
[lkml]   [2018]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] iio: adc: aspeed: Fix error handling path
On Mon,  8 Jan 2018 07:47:36 +0100
Christophe JAILLET <christophe.jaillet@wanadoo.fr> wrote:

> The labels and branching order of the error path of 'aspeed_adc_probe()'
> are broken.
> Re-order the labels and goto statements.
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Applied to the fixes-togreg-post-rc1 branch of iio.git.

The patch doesn't apply that far back so I'm going to assume
you are right and that it was a merge conflict that went wrong.

Anyhow, will go in sometime after rc1.

Thanks,

Jonathan

> ---
> Not sure where it comes from.
> Merge conflict incorrectly fixed?
> ---
> drivers/iio/adc/aspeed_adc.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
> index 327a49ba1991..9515ca165dfd 100644
> --- a/drivers/iio/adc/aspeed_adc.c
> +++ b/drivers/iio/adc/aspeed_adc.c
> @@ -243,7 +243,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
> ASPEED_ADC_INIT_POLLING_TIME,
> ASPEED_ADC_INIT_TIMEOUT);
> if (ret)
> - goto scaler_error;
> + goto poll_timeout_error;
> }
>
> /* Start all channels in normal mode. */
> @@ -274,9 +274,10 @@ static int aspeed_adc_probe(struct platform_device *pdev)
> writel(ASPEED_OPERATION_MODE_POWER_DOWN,
> data->base + ASPEED_REG_ENGINE_CONTROL);
> clk_disable_unprepare(data->clk_scaler->clk);
> -reset_error:
> - reset_control_assert(data->rst);
> clk_enable_error:
> +poll_timeout_error:
> + reset_control_assert(data->rst);
> +reset_error:
> clk_hw_unregister_divider(data->clk_scaler);
> scaler_error:
> clk_hw_unregister_divider(data->clk_prescaler);

\
 
 \ /
  Last update: 2018-01-14 23:27    [W:0.118 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site