lkml.org 
[lkml]   [2018]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 02/44] clk: davinci: New driver for davinci PLL clocks
From
Date
On 01/12/2018 03:21 AM, Sekhar Nori wrote:
> On Monday 08 January 2018 07:47 AM, David Lechner wrote:
>> +static unsigned long davinci_pll_clk_recalc(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
>> + unsigned long rate = parent_rate;
>> + u32 prediv, mult, postdiv;
>> +
>> + prediv = readl(pll->base + PREDIV) & PREDIV_RATIO_MASK;
>> + mult = readl(pll->base + PLLM) & PLLM_MASK;
>> + postdiv = readl(pll->base + POSTDIV) & POSTDIV_RATIO_MASK;
>
> Shouldn't we check if the pre and post dividers are enabled before using
> them?

I dug into this and the answer is no. The enable bit acts like a gate, not
a bypass, so it does not affect the rate calculation.



\
 
 \ /
  Last update: 2018-01-14 23:26    [W:0.092 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site