lkml.org 
[lkml]   [2018]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 net-next 08/11] net: hns3: change the unit of GL value macro
Date
From: Fuyun Liang <liangfuyun1@huawei.com>

Previously, driver used 2us as the GL unit. The time unit ethtool
command "-c" and "-C" use is 1us, so now the GL unit driver uses
actually is 1us.

This patch changes the unit of GL value macro from
2us to 1us.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index 7adbda8..213f501 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -452,10 +452,10 @@ enum hns3_link_mode_bits {
};

#define HNS3_INT_GL_MAX 0x1FE0
-#define HNS3_INT_GL_50K 0x000A
-#define HNS3_INT_GL_20K 0x0019
-#define HNS3_INT_GL_18K 0x001B
-#define HNS3_INT_GL_8K 0x003E
+#define HNS3_INT_GL_50K 0x0014
+#define HNS3_INT_GL_20K 0x0032
+#define HNS3_INT_GL_18K 0x0036
+#define HNS3_INT_GL_8K 0x007C

#define HNS3_INT_RL_MAX 0x00EC
#define HNS3_INT_RL_ENABLE_MASK 0x40
--
1.9.1
\
 
 \ /
  Last update: 2018-01-14 23:25    [W:0.057 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site