lkml.org 
[lkml]   [2018]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 5/5] usb: serial: f81534: fix tx error on some baud rate
From
Date
Hi Johan,

Johan Hovold 於 2018/1/9 下午 07:32 寫道:
> On Thu, Jan 04, 2018 at 10:29:21AM +0800, Ji-Ze Hong (Peter Hong) wrote:
>> + /*
>> + * We'll make tx frame error when baud rate from 384~500kps. So we'll
>> + * delay all tx data frame with 1bit.
>> + */
>> + port_priv->shadow_clk |= F81534_CLK_TX_DELAY_1BIT;
>
> You don't wan't to enable this only for the affected rates?
>

This bit will control all transmit TX frame always delay 1 bit
on enabled, but It'll transmit TX frame randomly delay 1 bit on
disabled.

We had tested it with BurnInTest to check the performance,
It'll not make the performance regression. So we'll directly add
it on all baud rate.

Thanks
--
With Best Regards,
Peter Hong

\
 
 \ /
  Last update: 2018-01-14 23:20    [W:0.137 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site