lkml.org 
[lkml]   [2018]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/9] doc: dt-bindings: Add doc for Ingenic TCU IRQ driver
Date
Add documentation about how to properly use the Ingenic TCU
(Timer/Counter Unit) IRQ driver from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
.../bindings/interrupt-controller/ingenic,tcu.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt

v3: New patch in this series

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
new file mode 100644
index 000000000000..e3a7d2354172
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
@@ -0,0 +1,33 @@
+Ingenic SoCs Timer/Counter Unit Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
+ * ingenic,jz4740-tcu-intc
+ * ingenic,jz4770-tcu-intc
+ * ingenic,jz4780-tcu-intc
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+- interrupt-parent : phandle of the interrupt controller.
+- interrupts : Specifies the interrupt the controller is connected to.
+
+Example:
+
+/ {
+ mfd@10002000 {
+ compatible = "ingenic,tcu", "simple-mfd", "syscon";
+ reg = <0x10002000 0x1000>;
+
+ tcu_irq: interrupt-controller {
+ compatible = "ingenic,jz4740-tcu-intc";
+ reg = <0x10002020 0x20>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+ };
+};
--
2.11.0
\
 
 \ /
  Last update: 2018-01-14 23:22    [W:0.259 / U:1.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site