lkml.org 
[lkml]   [2017]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ASoC: fsl_ssi: Override bit clock rate based on slot number
From
Date

On 08/09/2017 07:42, Nicolin Chen wrote:
> On Thu, Sep 07, 2017 at 10:23:43PM -0700, Nicolin Chen wrote:
>> The set_sysclk() now is used to override the output bit clock rate.
>> But this is not a common way to implement a set_dai_sysclk(). And
>> this creates a problem when a general machine driver (simple-card
>> for example) tries to do set_dai_sysclk() by passing an input clock
>> rate for the baud clock instead of setting the bit clock rate as
>> fsl_ssi driver expected.
>>
>> So this patch solves this problem by firstly removing set_sysclk()
>> since the hw_params() can calculate the bit clock rate. Secondly,
>> in order not to break those TDM use cases which previously might
>> have been using set_sysclk() to override the bit clock rate, this
>> patch changes the driver to override it based on the slot number.
>>
>> The patch also removes an obsolete comment of the dir parameter.
>>
>> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> Forgot to mention, I think that it's better to wait for a couple of
> Tested-by from those who use the TDM mode of SSI before applying it.
I can check next monday or tuesday.
Arnaud
> Thanks
> Nicolin

\
 
 \ /
  Last update: 2017-09-08 08:15    [W:0.144 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site