Messages in this thread | | | Date | Sat, 30 Sep 2017 18:18:41 +0100 | From | Jonathan Cameron <> | Subject | Re: [PATCH v6 2/2] iio:dac: Add DT binding documentation for ds4424 |
| |
On Fri, 22 Sep 2017 13:12:09 -0700 "Ismail H. Kose" <Ismail.Kose@maximintegrated.com> wrote:
> Signed-off-by: Ismail H. Kose <ihkose@gmail.com> > Signed-off-by: Ismail H. Kose <Ismail.Kose@maximintegrated.com>
Direct at Rob Herring...
Rob, this is now a very standard binding so I'm going to take it into my testing tree. If you have a chance to take a last look at it though that would be great.
For everyone else:
Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.
Thanks,
Jonathan > --- > v6: > * Removed reference resistors property > * Fixed regulator property > v3: > * Removed iio-map > v2: > * Removed min/max rfs, ifs-scale, etc values > > Documentation/devicetree/bindings/iio/dac/ds4424.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/dac/ds4424.txt > > diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt > new file mode 100644 > index 000000000000..eaebbf8dab40 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt > @@ -0,0 +1,20 @@ > +Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver > + > +Datasheet publicly available at: > +https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf > + > +Required properties: > + - compatible: Should be one of > + maxim,ds4422 > + maxim,ds4424 > + - reg: Should contain the DAC I2C address > + > +Optional properties: > + - vcc-supply: Power supply is optional. If not defined, driver will ignore it. > + > +Example: > + ds4224@10 { > + compatible = "maxim,ds4424"; > + reg = <0x10>; /* When A0, A1 pins are ground */ > + vcc-supply = <&vcc_3v3>; > + };
| |