lkml.org 
[lkml]   [2017]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] dmaengine: edma: Implement protection for invalid max_burst
On Tue, Sep 12, 2017 at 01:44:20PM +0300, Peter Ujfalusi wrote:
> Set the device's max_burst to 32767 (CIDX is 16bit signed value) so clients
> can take this into consideration when setting up the trasnfer.

/s/trasnfer/transfer

>
> During slave transfer preparation check if the requested maxburst is valid.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> drivers/dma/edma.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
> index 3879f80a4815..6970355abdc9 100644
> --- a/drivers/dma/edma.c
> +++ b/drivers/dma/edma.c
> @@ -891,6 +891,10 @@ static int edma_slave_config(struct dma_chan *chan,
> cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
> return -EINVAL;
>
> + if (cfg->src_maxburst > chan->device->max_burst ||
> + cfg->dst_maxburst > chan->device->max_burst)
> + return -EINVAL;
> +
> memcpy(&echan->cfg, cfg, sizeof(echan->cfg));
>
> return 0;
> @@ -1855,6 +1859,7 @@ static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
> s_ddev->dst_addr_widths = EDMA_DMA_BUSWIDTHS;
> s_ddev->directions |= (BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV));
> s_ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
> + s_ddev->max_burst = SZ_32K - 1; /* CIDX: 16bit signed */
>
> s_ddev->dev = ecc->dev;
> INIT_LIST_HEAD(&s_ddev->channels);
> --
> 2.14.1
>
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
>

--
~Vinod

\
 
 \ /
  Last update: 2017-09-21 19:39    [W:0.170 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site