lkml.org 
[lkml]   [2017]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 04/12] ARM: dts: nanopi: Fix node with unit name and no reg property
    Date
    This patch fix the warning "xxx has a unit name, but no reg property" by
    removing "@0" from such node.

    Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
    ---
    arch/arm/boot/dts/sun8i-h3-nanopi.dtsi | 8 ++++----
    1 file changed, 4 insertions(+), 4 deletions(-)

    diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
    index c6decee41a27..7646e331bd29 100644
    --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
    +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
    @@ -81,7 +81,7 @@
    pinctrl-names = "default";
    pinctrl-0 = <&sw_r_npi>;

    - k1@0 {
    + k1 {
    label = "k1";
    linux,code = <KEY_POWER>;
    gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
    @@ -108,19 +108,19 @@
    };

    &pio {
    - leds_npi: led_pins@0 {
    + leds_npi: led_pins {
    pins = "PA10";
    function = "gpio_out";
    };
    };

    &r_pio {
    - leds_r_npi: led_pins@0 {
    + leds_r_npi: led_pins {
    pins = "PL10";
    function = "gpio_out";
    };

    - sw_r_npi: key_pins@0 {
    + sw_r_npi: key_pins {
    pins = "PL3";
    function = "gpio_in";
    };
    --
    2.13.5
    \
     
     \ /
      Last update: 2017-09-21 19:39    [W:3.029 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site