lkml.org 
[lkml]   [2017]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 4/6] ARM: dts: imx6dl-icore: Add LVDS support
Hi Fabio,

On Tue, Sep 19, 2017 at 9:22 PM, Fabio Estevam <festevam@gmail.com> wrote:
> Hi Jagan,
>
> On Tue, Sep 19, 2017 at 2:06 AM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>> Hi Fabio,
>>
>>> Please add the support of this panel to drivers/gpu/drm/panel/panel-simple.c.
>>>
>>> Then you can refer its compatible in your board dts.
>>
>> Yes, I'm trying to add the display timings but I couldn't find any
>> info how to find front_portch, back_porch and sync. I remember
>> blanking time = Sync Width + BP + FP so out of which how can we
>> determine each one respectively. Please let me know if you have any
>> idea, I’ve attached the data-sheet.
>
> Does the existing ampire,am800480r3tmqwa1h binding work for your display?

Yes, it is working..but need to understand how these respective
timings were calculated(because I need to add few more) . I tried this
supported ampire but couldn't get the data-sheet. Please point me if
you find any details.

thanks!
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

\
 
 \ /
  Last update: 2017-09-19 21:22    [W:0.092 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site