lkml.org 
[lkml]   [2017]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] PCI: iproc: Add optional brcm,pci-hotplug
On Wed, Aug 9, 2017 at 10:57 AM, Ray Jui <ray.jui@broadcom.com> wrote:
>
>
> On 8/8/2017 10:22 PM, Oza Oza wrote:
>>
>> On Tue, Aug 8, 2017 at 7:50 PM, Rob Herring <robh+dt@kernel.org> wrote:
>>>
>>> Please send bindings to DT list.
>>
>> Sure, will do that.
>>
>>> On Mon, Aug 7, 2017 at 11:44 PM, Oza Pawandeep <oza.oza@broadcom.com>
>>> wrote:
>>>>
>>>> Add description for optional device tree property
>>>> 'brcm,pci-hotplug' for PCI hotplug feature.
>>>>
>>>> Signed-off-by: Oza Pawandeep <oza.oza@broadcom.com>
>>>> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
>>>> b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
>>>> index b8e48b4..a3bad24 100644
>>>> --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
>>>> +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
>>>> @@ -72,6 +72,29 @@ Optional properties:
>>>> - brcm,pcie-msi-inten: Needs to be present for some older iProc
>>>> platforms that
>>>> require the interrupt enable registers to be set explicitly to enable
>>>> MSI
>>>>
>>>> +Optional properties:
>>>> +- brcm,pci-hotplug: PCI hotplug feature is supported.
>>>
>>> I think we should make this a common property. We already have
>>> "ibm,slot-pluggable", so I'd propose "slot-pluggable".
>>>
>>> There's also "hotpluggable" for memory nodes defined, so we could
>>> reuse that here.
>>>
>> ok I will rename this to
>> brcm,slot-pluggable
>
>
> How's brcm,slot-pluggable a common property? It's still brcm specific.
> Didn't Rob propose either "slot-pluggable" or "hotpluggable"?
>
> And note it goes to the generic PCI binding instead iProc PCIe specific
> binding.
>

Initially I thought, Rob suggested either "slot-pluggable".
followed by, "hotpluggable" since memory node already has such property.

but not sure in which generic pci binding I should add ?
should it be part of
Documentation/devicetree/bindings/pci/host-generic-pci.txt

Can you please clarify Rob ?

Regards,
Oza.

\
 
 \ /
  Last update: 2017-08-09 07:43    [W:0.041 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site