lkml.org 
[lkml]   [2017]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectApplied "regulator: Add support for stm32-vrefbuf" to the regulator tree
Date
The patch

regulator: Add support for stm32-vrefbuf

has been applied to the regulator tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 0cdbf481e927278787042857e02c3944f588ad25 Mon Sep 17 00:00:00 2001
From: Fabrice Gasnier <fabrice.gasnier@st.com>
Date: Wed, 30 Aug 2017 17:55:28 +0200
Subject: [PATCH] regulator: Add support for stm32-vrefbuf

Add regulator driver for STM32 voltage reference buffer which can be
used as voltage reference for ADCs, DACs and external components through
dedicated VREF+ pin.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/Kconfig | 12 +++
drivers/regulator/Makefile | 1 +
drivers/regulator/stm32-vrefbuf.c | 202 ++++++++++++++++++++++++++++++++++++++
3 files changed, 215 insertions(+)
create mode 100644 drivers/regulator/stm32-vrefbuf.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 99b9362331b5..2cb2c6324480 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -746,6 +746,18 @@ config REGULATOR_SKY81452
This driver can also be built as a module. If so, the module
will be called sky81452-regulator.

+config REGULATOR_STM32_VREFBUF
+ tristate "STMicroelectronics STM32 VREFBUF"
+ depends on ARCH_STM32 || COMPILE_TEST
+ help
+ This driver supports STMicroelectronics STM32 VREFBUF (voltage
+ reference buffer) which can be used as voltage reference for
+ internal ADCs, DACs and also for external components through
+ dedicated Vref+ pin.
+
+ This driver can also be built as a module. If so, the module
+ will be called stm32-vrefbuf.
+
config REGULATOR_TI_ABB
tristate "TI Adaptive Body Bias on-chip LDO"
depends on ARCH_OMAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 95b1e86ae692..5af3788be631 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
+obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
diff --git a/drivers/regulator/stm32-vrefbuf.c b/drivers/regulator/stm32-vrefbuf.c
new file mode 100644
index 000000000000..72c8b3e1022b
--- /dev/null
+++ b/drivers/regulator/stm32-vrefbuf.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) STMicroelectronics 2017
+ *
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com>
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+/* STM32 VREFBUF registers */
+#define STM32_VREFBUF_CSR 0x00
+
+/* STM32 VREFBUF CSR bitfields */
+#define STM32_VRS GENMASK(6, 4)
+#define STM32_VRR BIT(3)
+#define STM32_HIZ BIT(1)
+#define STM32_ENVR BIT(0)
+
+struct stm32_vrefbuf {
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static const unsigned int stm32_vrefbuf_voltages[] = {
+ /* Matches resp. VRS = 000b, 001b, 010b, 011b */
+ 2500000, 2048000, 1800000, 1500000,
+};
+
+static int stm32_vrefbuf_enable(struct regulator_dev *rdev)
+{
+ struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
+ u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
+ int ret;
+
+ val = (val & ~STM32_HIZ) | STM32_ENVR;
+ writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
+
+ /*
+ * Vrefbuf startup time depends on external capacitor: wait here for
+ * VRR to be set. That means output has reached expected value.
+ * ~650us sleep should be enough for caps up to 1.5uF. Use 10ms as
+ * arbitrary timeout.
+ */
+ ret = readl_poll_timeout(priv->base + STM32_VREFBUF_CSR, val,
+ !(val & STM32_VRR), 650, 10000);
+ if (ret) {
+ dev_err(&rdev->dev, "stm32 vrefbuf timed out!\n");
+ val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
+ val = (val & ~STM32_ENVR) | STM32_HIZ;
+ writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
+ }
+
+ return ret;
+}
+
+static int stm32_vrefbuf_disable(struct regulator_dev *rdev)
+{
+ struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
+ u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
+
+ val = (val & ~STM32_ENVR) | STM32_HIZ;
+ writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
+
+ return 0;
+}
+
+static int stm32_vrefbuf_is_enabled(struct regulator_dev *rdev)
+{
+ struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
+
+ return readl_relaxed(priv->base + STM32_VREFBUF_CSR) & STM32_ENVR;
+}
+
+static int stm32_vrefbuf_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned sel)
+{
+ struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
+ u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
+
+ val = (val & ~STM32_VRS) | FIELD_PREP(STM32_VRS, sel);
+ writel_relaxed(val, priv->base + STM32_VREFBUF_CSR);
+
+ return 0;
+}
+
+static int stm32_vrefbuf_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
+ u32 val = readl_relaxed(priv->base + STM32_VREFBUF_CSR);
+
+ return FIELD_GET(STM32_VRS, val);
+}
+
+static const struct regulator_ops stm32_vrefbuf_volt_ops = {
+ .enable = stm32_vrefbuf_enable,
+ .disable = stm32_vrefbuf_disable,
+ .is_enabled = stm32_vrefbuf_is_enabled,
+ .get_voltage_sel = stm32_vrefbuf_get_voltage_sel,
+ .set_voltage_sel = stm32_vrefbuf_set_voltage_sel,
+ .list_voltage = regulator_list_voltage_table,
+};
+
+static const struct regulator_desc stm32_vrefbuf_regu = {
+ .name = "vref",
+ .supply_name = "vdda",
+ .volt_table = stm32_vrefbuf_voltages,
+ .n_voltages = ARRAY_SIZE(stm32_vrefbuf_voltages),
+ .ops = &stm32_vrefbuf_volt_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+};
+
+static int stm32_vrefbuf_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct stm32_vrefbuf *priv;
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "clk prepare failed with error %d\n", ret);
+ return ret;
+ }
+
+ config.dev = &pdev->dev;
+ config.driver_data = priv;
+ config.of_node = pdev->dev.of_node;
+ config.init_data = of_get_regulator_init_data(&pdev->dev,
+ pdev->dev.of_node,
+ &stm32_vrefbuf_regu);
+
+ rdev = regulator_register(&stm32_vrefbuf_regu, &config);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(&pdev->dev, "register failed with error %d\n", ret);
+ goto err_clk_dis;
+ }
+ platform_set_drvdata(pdev, rdev);
+
+ return 0;
+
+err_clk_dis:
+ clk_disable_unprepare(priv->clk);
+
+ return ret;
+}
+
+static int stm32_vrefbuf_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+ struct stm32_vrefbuf *priv = rdev_get_drvdata(rdev);
+
+ regulator_unregister(rdev);
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+};
+
+static const struct of_device_id stm32_vrefbuf_of_match[] = {
+ { .compatible = "st,stm32-vrefbuf", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stm32_vrefbuf_of_match);
+
+static struct platform_driver stm32_vrefbuf_driver = {
+ .probe = stm32_vrefbuf_probe,
+ .remove = stm32_vrefbuf_remove,
+ .driver = {
+ .name = "stm32-vrefbuf",
+ .of_match_table = of_match_ptr(stm32_vrefbuf_of_match),
+ },
+};
+module_platform_driver(stm32_vrefbuf_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 VREFBUF driver");
+MODULE_ALIAS("platform:stm32-vrefbuf");
--
2.14.1
\
 
 \ /
  Last update: 2017-08-30 19:59    [W:0.044 / U:1.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site