lkml.org 
[lkml]   [2017]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] acpi: apei: call into AER handling regardless of severity
From
Date
On 8/30/2017 9:31 AM, Sinan Kaya wrote:
> On 8/30/2017 11:16 AM, Borislav Petkov wrote:
>> On Wed, Aug 30, 2017 at 10:05:44AM -0400, Sinan Kaya wrote:
>>> Link reset is not the only recovery mechanism. In the case of nonfatal
>>> errors, it is assumed that the endpoint CSR is still reachable.
>>> Error is propagated the PCIe endpoint driver. Endpoint driver does a
>>> re-initialization, we are back in business.
>> I'm assuming that's broadcast_error_message()'s job.
>>
> That's right. Each driver provides an err_handler hook. broadcast function
> calls these.
>
> static struct pci_driver e1000_driver = {
> ..
> .err_handler = &e1000_err_handler
> };
>
> struct pci_error_handlers {
> ...
> pci_ers_result_t (*error_detected)(struct pci_dev *dev,
> enum pci_channel_state error);
> }
>
>
>>> That's not true. The GHES code is changing the severity here before posting
>>> to the AER driver in ghes_do_proc().
>>>
>>> if (gdata->flags & CPER_SEC_RESET)
>>> aer_severity = AER_FATAL;
>> You're missing the point that we would walk into that if branch *only* for
>>
>> if (sev == GHES_SEV_RECOVERABLE &&
>> sec_sev == GHES_SEV_RECOVERABLE
>>
>> severities. So if you have an AER_FATAL error but ghes severities are
>> not GHES_SEV_RECOVERABLE, nothing happens.
> I see. We should probably try to do something only if GHES_SEV_CORRECTED or
> GHES_SEV_RECOVERABLE.
>
> If somebody wants to crash the system with GHES_SEV_PANIC, there is no point
> in doing additional work.
See below.
>>> No, AER ISR is not set up if firmware first is enabled.
>> So then this is a major suckage. We do AER recovery on FF systems only
>> for GHES_SEV_RECOVERABLE severity.
>>
>>> The behavior should match non firmware-first case ideally.
>>>
>>> 1. Print all correctable errors.
>>> 2. Go to do_recovery for all uncorrectable errors including fatal and
>>> non-fatal.
>>>
>>> This is also what AER driver does in the absence of firmware first via
>>> handle_error_source().
>> Yes, that makes sense.
>>
>> Which would mean that we'd call aer_recover_queue() regardless of GHES
>> severity but we'd do recovery only if GHES_SEV_RECOVERABLE is set
>> or CPER_SEC_RESET. I.e., we can communicate all that by setting the
>> correct AER severity before calling aer_recover_queue(). And then call
>> do_recovery() based on AER severity.
>>
>> Hmmm?
>>
> Sounds good. Do you still want to do PCIe recovery in the case of
> GHES_SEV_PANIC or if some FW returns GHES_SEV_NO?
>
We do not need to worry about the GHES_SEV_PANIC case. Those get sent to
__ghes_panic() in ghes_proc() without even making it to ghes_do_proc().
Those errors are just printed and then the kernel panics.

I think with my two patches we will have the desired functionality:

GHES_SEV_CORRECTABLE -> AER_CORRECTABLE -> Print AER info, but do not
call do_recovery

GHES_SEV_RECOVERABLE -> AER_NONFATAL -> Print AER info and do_recovery

GHES_RECOVERABLE and CPER_SEC_RESET -> AER_FATAL -> Print AER info and
do_recover

Thanks,
Tyler

--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.

\
 
 \ /
  Last update: 2017-08-30 17:42    [W:0.042 / U:1.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site