lkml.org 
[lkml]   [2017]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 05/11] staging: typec: fusb302: Use client->irq as irq if set
From
Date
On 08/30/2017 02:48 AM, Hans de Goede wrote:
> The fusb302 is also used on x86 systems where the platform code sets
> the irq in client->irq and there is no gpio named fcs,int_n.
>
> Cc: "Yueyao (Nathan) Zhu" <yueyao@google.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> drivers/staging/typec/fusb302/fusb302.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c
> index 1c1751c994db..675161cf4f3a 100644
> --- a/drivers/staging/typec/fusb302/fusb302.c
> +++ b/drivers/staging/typec/fusb302/fusb302.c
> @@ -1735,9 +1735,13 @@ static int fusb302_probe(struct i2c_client *client,
> goto destroy_workqueue;
> }
>
> - ret = init_gpio(chip);
> - if (ret < 0)
> - goto destroy_workqueue;
> + if (client->irq) {
> + chip->gpio_int_n_irq = client->irq;
> + } else {
> + ret = init_gpio(chip);
> + if (ret < 0)
> + goto destroy_workqueue;
> + }
>
> chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
> if (IS_ERR(chip->tcpm_port)) {
>

\
 
 \ /
  Last update: 2017-08-30 15:58    [W:0.400 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site