Messages in this thread | | | Subject | Re: [PATCH v5] vfio: platform: reset: Add Broadcom FlexRM reset module | From | Scott Branden <> | Date | Tue, 22 Aug 2017 11:47:52 -0700 |
| |
Hi Anup,
We should add default (as below).
On 17-08-22 03:00 AM, Anup Patel wrote: > This patch adds Broadcom FlexRM low-level reset for > VFIO platform. > > It will do the following: > 1. Disable/Deactivate each FlexRM ring > 2. Flush each FlexRM ring > > The cleanup sequence for FlexRM rings is adapted from > Broadcom FlexRM mailbox driver. > > Signed-off-by: Anup Patel <anup.patel@broadcom.com> > Reviewed-by: Oza Oza <oza.oza@broadcom.com> > Reviewed-by: Scott Branden <scott.branden@broadcom.com> > Reviewed-by: Eric Auger <eric.auger@redhat.com> > --- > drivers/vfio/platform/reset/Kconfig | 8 ++ > drivers/vfio/platform/reset/Makefile | 1 + > .../vfio/platform/reset/vfio_platform_bcmflexrm.c | 100 +++++++++++++++++++++ > 3 files changed, 109 insertions(+) > create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c > > diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig > index 70cccc5..8833805 100644 > --- a/drivers/vfio/platform/reset/Kconfig > +++ b/drivers/vfio/platform/reset/Kconfig > @@ -13,3 +13,11 @@ config VFIO_PLATFORM_AMDXGBE_RESET > Enables the VFIO platform driver to handle reset for AMD XGBE > > If you don't know what to do here, say N. > + > +config VFIO_PLATFORM_BCMFLEXRM_RESET > + tristate "VFIO support for Broadcom FlexRM reset" > + depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST) default ARCH_BCM_IPROC > + help > + Enables the VFIO platform driver to handle reset for Broadcom FlexRM > + > + If you don't know what to do here, say N. >
| |