lkml.org 
[lkml]   [2017]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v5 11/16] arm64: zynqmp: Add generic compatible string for I2C EEPROM
From
Date
On 21.8.2017 13:27, Javier Martinez Canillas wrote:
> [snip]
>
>>>
>>> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
>>> index ef1b9e573af0..53907b7a7fd9 100644
>>> --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
>>> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
>>> @@ -55,7 +55,7 @@
>>> status = "okay";
>>> clock-frequency = <400000>;
>>> eeprom@54 {
>>> - compatible = "at,24c64";
>>> + compatible = "atmel,24c64";
>>> reg = <0x54>;
>>> };
>>> };
>>> @@ -64,7 +64,7 @@
>>> status = "okay";
>>> clock-frequency = <400000>;
>>> eeprom@55 {
>>> - compatible = "at,24c64";
>>> + compatible = "atmel,24c64";
>>> reg = <0x55>;
>>> };
>>> };
>>>
>>
>> Acked-by: Michal Simek <michal.simek@xilinx.com>
>>
>
> Any reasons why this patch was never picked? It was acked two months ago.

Normally when you send series then it should be applied as the whole
series not just one piece of that.

Anyway I see that changes are applied and this one is missing that's why
I will add to zynqmp/dt branch and going to send pull request today.

Thanks,
Michal

\
 
 \ /
  Last update: 2017-08-21 14:05    [W:0.106 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site