lkml.org 
[lkml]   [2017]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH 0/2] serial: 8250: add support for MediaTek BTIF controller
    Date
    From: Sean Wang <sean.wang@mediatek.com>

    This patchset introduces the support for MediaTek BTIF controller.

    MediaTek BTIF controller is the serial interface similar to UART but it
    works only as the digital device which is mainly used to communicate with
    the connectivity module also called CONNSYS inside the SoC which could be
    mostly found on those MediaTek SoCs with Bluetooth feature.

    And the controller is made as being compatible with the 8250 register
    layout so it tends to be integrated with existing 8250 core driver and
    have no requirement for the modem configuration additionally such as the
    baud rate calculation and assignment.

    Sean Wang (2):
    dt-bindings: serial: Add MediaTek BTIF controller bindings
    tty: serial: 8250: Add MediaTek BTIF controller on MT7622 and MT7623
    SoC

    .../devicetree/bindings/serial/mtk-btif.txt | 26 +++
    drivers/tty/serial/8250/8250_btif.c | 224 +++++++++++++++++++++
    drivers/tty/serial/8250/Kconfig | 9 +
    drivers/tty/serial/8250/Makefile | 1 +
    4 files changed, 260 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/serial/mtk-btif.txt
    create mode 100644 drivers/tty/serial/8250/8250_btif.c

    --
    2.7.4

    \
     
     \ /
      Last update: 2017-08-02 19:05    [W:8.056 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site