lkml.org 
[lkml]   [2017]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] Documentation: dt: iio: at91-sama5d2_adc: add optional dma property
On Thu, Aug 10, 2017 at 03:34:57PM +0300, Eugen Hristev wrote:
> Added property for DMA configuration of the device.

"dt-bindings: iio: ..." is preferred for subject.

>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
> Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
> index 552e7a8..5f94d47 100644
> --- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
> @@ -17,6 +17,11 @@ Required properties:
> This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING ,
> IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH
>
> +Optional properties:
> + - dmas: Phandle to dma channel for the ADC.
> + See ../../dma/dma.txt for details.
> + - dma-names: Must be "rx" when dmas property is being used.

*-names is pointless when there's only one.

> +
> Example:
>
> adc: adc@fc030000 {
> @@ -31,4 +36,6 @@ adc: adc@fc030000 {
> vddana-supply = <&vdd_3v3_lp_reg>;
> vref-supply = <&vdd_3v3_lp_reg>;
> atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
> + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
> + dma-names = "rx";
> }
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2017-08-17 17:12    [W:0.034 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site