lkml.org 
[lkml]   [2017]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv2 1/3] dt: xilinx: zynqmp: Add bindings for PM firmware
From
Date
On 16.8.2017 18:00, Mark Rutland wrote:
> On Wed, Aug 16, 2017 at 02:24:56PM +0200, Michal Simek wrote:
>> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>
>> Document the DT bindings for the Zynq UltraScale+ PM Firmware.
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>> ---
>>
>> Changes in v2:
>> - Move to bindings/firmware and also add it to firmware node
>> Reported-by Rob
>>
>> .../bindings/firmware/xlnx,zynqmp-pm.txt | 22 ++++++++++++++++++++++
>> 1 file changed, 22 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/firmware/xlnx,zynqmp-pm.txt
>>
>> diff --git a/Documentation/devicetree/bindings/firmware/xlnx,zynqmp-pm.txt b/Documentation/devicetree/bindings/firmware/xlnx,zynqmp-pm.txt
>> new file mode 100644
>> index 000000000000..7de0c82758b3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/firmware/xlnx,zynqmp-pm.txt
>> @@ -0,0 +1,22 @@
>> +Xilinx Zynq MPSoC Firmware Device Tree Bindings
>> +
>> +The zynqmp-pm node describes the interface to platform firmware.
>
> Is there any documentation for this? I appreciate that the answer
> might be "no".

We have pm documentation somewhere but not sure if this firmware
interface is the part of it. Let me ask around and see what I can find out.

>
>> +Required properties:
>> + - compatible: Must contain: "xlnx,zynqmp-pm"
>> + - method: The method of calling the PM-API firmware layer.
>> + Permitted values are:
>> + - "smc" : To be used in configurations without a hypervisor
>> + - "hvc" : To be used when hypervisor is present
>> + - interrupts: Interrupt specifier
>
> For what, exactly?
>
> Is this an interrupt for FW to signal the OS somehow?
>
> If so, is it an SGI?

This is SPI. There is a dedicated hardware on the chip for communication
with APU.

https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf
page 275

Anyway I don't need this for this driver that's why I will remove it.

Thanks,
Michal




\
 
 \ /
  Last update: 2017-08-17 08:27    [W:0.070 / U:3.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site