lkml.org 
[lkml]   [2017]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] dt-bindings: usb: keystone-usb: Update bindings pm and clocks properties
Date
Update various properties to properly indicate their requirement depending
on the SoC.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
Version 2:
Clarify clock requirements in binding document

Documentation/devicetree/bindings/usb/keystone-usb.txt | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
index 60527d3..2d1bef1 100644
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -12,8 +12,21 @@ Required properties:
MPU.
- ranges: allows valid 1:1 translation between child's address space and
parent's address space.
- - clocks: Clock IDs array as required by the controller.
- - clock-names: names of clocks correseponding to IDs in the clock property.
+
+SoC-specific Required Properties:
+The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E
+SoCs only:
+
+- clocks: Clock ID for USB functional clock.
+- clock-names: Must be "usb".
+
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains: Should contain a phandle to a PM domain provider node
+ and an args specifier containing the USB device id
+ value. This property is as per the binding,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt

Sub-nodes:
The dwc3 core should be added as subnode to Keystone DWC3 glue.
--
2.9.4.dirty
\
 
 \ /
  Last update: 2017-08-16 23:57    [W:0.047 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site