lkml.org 
[lkml]   [2017]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v4 00/20] Add QCOM QPIC NAND support
    Le Fri, 11 Aug 2017 17:09:15 +0530,
    Abhishek Sahu <absahu@codeaurora.org> a écrit :

    > * v4:
    >
    > 1. Added Acked-by from Rob for DT documentation patches
    > 2. Removed ipq8074 compatible string from ipq4019 DT example.
    > 2. Used the BIT macro for NAND_CMD_VLD bits and consistent names
    > as suggested by Boris in v3.
    >
    > * v3:
    >
    > 1. Removed the patches already applied to linux-next and
    > rebased the remaining patches on [1]
    > 2. Reordered the patches and put the BAM DMA changes [2]
    > dependent patches and compatible string patches in last
    > 3. Removed the register offsets array and used the dev_cmd offsets
    > 4. Changed some macro names to small letters for better code readability
    > 5. Changed the compatible string to SoC specific
    > 6. Did minor code changes for adding comment, error handling, structure names
    > 7. Combined raw write (patch#18) and passing flag parameter (patch#22) patch
    > into one
    > 8. Made separate patch for compatible string and NAND properties
    > 9. Made separate patch for BAM command descriptor and data descriptors handling
    > 10. Changed commit message for some of the patches
    > 11. Addressed review comments given in v2
    > 12. Added Reviewed-by of Archit for some of the patches from v2
    > 13. All the MTD tests are working fine for IPQ8064 AP148, IPQ4019 DK04 and
    > IPQ8074 HK01 boards for v3 patches
    >
    > [1] http://git.infradead.org/l2-mtd.git/shortlog/refs/heads/nand/next
    > [2] http://www.spinics.net/lists/dmaengine/msg13662.html
    >
    > * v2:
    >
    > 1. Addressed the review comments given in v1
    > 2. Removed the DMA coherent buffer for register read and used
    > streaming DMA API’s
    > 3. Reorganized the NAND read and write functions
    > 4. Separated patch for driver and documentation changes
    > 5. Changed the compatible string for EBI2
    >
    > * v1:
    >
    > http://www.spinics.net/lists/devicetree/msg183706.html
    >
    > Abhishek Sahu (20):
    > mtd: nand: qcom: fix read failure without complete bootchain
    > mtd: nand: qcom: support for NAND controller properties
    > mtd: nand: qcom: add bam property for QPIC NAND controller
    > mtd: nand: qcom: add and initialize QPIC DMA resources

    Applied patches 1 to 4. Still waiting a bit to let Archit review the
    remaining ones.

    Regards,

    Boris

    > mtd: nand: qcom: DMA mapping support for register read buffer
    > mtd: nand: qcom: allocate BAM transaction
    > mtd: nand: qcom: add BAM DMA descriptor handling
    > mtd: nand: qcom: support for passing flags in transfer functions
    > mtd: nand: qcom: support for read location registers
    > mtd: nand: qcom: erased codeword detection configuration
    > mtd: nand: qcom: enable BAM or ADM mode
    > mtd: nand: qcom: QPIC data descriptors handling
    > mtd: nand: qcom: support for different DEV_CMD register offsets
    > mtd: nand: qcom: add command elements in BAM transaction
    > mtd: nand: qcom: support for command descriptor formation
    > dt-bindings: qcom_nandc: fix the ipq806x device tree example
    > dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
    > dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
    > mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
    > mtd: nand: qcom: support for IPQ8074 QPIC NAND controller
    >
    > .../devicetree/bindings/mtd/qcom_nandc.txt | 63 +-
    > drivers/mtd/nand/qcom_nandc.c | 866 ++++++++++++++++++---
    > 2 files changed, 814 insertions(+), 115 deletions(-)
    >

    \
     
     \ /
      Last update: 2017-08-13 09:48    [W:4.144 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site