Messages in this thread | | | Subject | Re: [PATCH 1/9] devicetree: bindings: Add sata port phy config parameters in ahci-ceva | From | Michal Simek <> | Date | Fri, 11 Aug 2017 14:36:37 +0200 |
| |
On 10.8.2017 21:07, Rob Herring wrote: > On Fri, Aug 04, 2017 at 03:18:10PM +0200, Michal Simek wrote: >> From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> >> >> This patch adds device tree bindings for sata port phy parameters >> in the ahci-ceva.txt file. >> >> Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> >> Signed-off-by: Michal Simek <michal.simek@xilinx.com> >> --- >> >> .../devicetree/bindings/ata/ahci-ceva.txt | 39 ++++++++++++++++++++++ >> 1 file changed, 39 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt >> index 7ca8b976c13a..f97546f61444 100644 >> --- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt >> +++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt >> @@ -5,6 +5,36 @@ Required properties: >> - compatible: Compatibility string. Must be 'ceva,ahci-1v84'. >> - clocks: Input clock specifier. Refer to common clock bindings. >> - interrupts: Interrupt specifier. Refer to interrupt binding. >> + - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0. >> + - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1. >> + The fields for the above parameter must be as shown below: >> + ceva,phy-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>; > > phy? Should be pN?
pN will be in v2.
Thanks, Michal
| |