lkml.org 
[lkml]   [2017]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/5] arm64: dts: rockchip: add tsadc node for rk3328 SoC
From
Date


在 2017/8/11 14:38, Caesar Wang 写道:
> 在 2017年08月04日 16:06, Rocky Hao 写道:
>> add tsadc needed main information for rk3328 SoC.
>> 50000Hz is the max clock rate supported by tsadc module.
>>
>> Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
>> ---
>> Change in v2:
>> - remove gerrit Change-Id
>>
>> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 20 ++++++++++++++++++++
>> 1 file changed, 20 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
>> b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
>> index db4b2708084d..186fb93fdffd 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
>> @@ -308,6 +308,26 @@
>> interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
>> };
>> + tsadc: tsadc@ff250000 {
>> + compatible = "rockchip,rk3328-tsadc";
>> + reg = <0x0 0xff250000 0x0 0x100>;
>> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
>> + rockchip,grf = <&grf>;
>> + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
>> + clock-names = "tsadc", "apb_pclk";
>> + assigned-clocks = <&cru SCLK_TSADC>;
>> + assigned-clock-rates = <50000>;
>> + resets = <&cru SRST_TSADC>;
>> + reset-names = "tsadc-apb";
>> + pinctrl-names = "init", "default", "sleep";
>> + pinctrl-0 = <&otp_gpio>;
>> + pinctrl-1 = <&otp_out>;
>> + pinctrl-2 = <&otp_gpio>;
>> + #thermal-sensor-cells = <1>;
>
> Only one sensor, so maybe the value should be 0.
Caesar, #thermal-sensor-cells means parameter counts used to match the
proper sensor registered. Both 0 and 1 work well.

Case 0, i.e. #thermal-sensor-cells = <0>, it uses the default channel
number 0 to match tsadc channal.
Case 1, i.e. #thermal-sensor-cells = <1>, it uses the setting
"thermal-sensors = <&tsadc 0>;" to match tsadc channal.

Case 1 provides more readable info than case 0. By my understanding,
using the default value such as case 0, is not a good coding style.

>
>> + rockchip,hw-tshut-temp = <100000>;
>> + status = "disabled";
>> + };
>> +
>> saradc: adc@ff280000 {
>> compatible = "rockchip,rk3328-saradc",
>> "rockchip,rk3399-saradc";
>> reg = <0x0 0xff280000 0x0 0x100>;
>
>
>
>

\
 
 \ /
  Last update: 2017-08-11 11:46    [W:0.052 / U:1.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site