Messages in this thread | | | From | "Reizer, Eyal" <> | Subject | RE: [v6] wlcore: add missing nvs file name info for wilink8 | Date | Thu, 10 Aug 2017 14:23:37 +0000 |
| |
> > > > Sure, just want to make sure we are not trying to add work around just for > A couple of faulty devices. > > > > I have verified using a couple of com6 modules with an am335x-evm and > > they had mac addresses read ok. > > > > Sounds like there are multiple variants of the wl12xx > > available then. > > > I am trying to find out internally if there is a possibility that there were > devices > Produced in the past where the internal fuses were not programmed with a > valid > Address before being assembled into the modules. >
Seems like MAC address for wilink6/7 was added to devices that were produced around Q3 of 2010 In case you still have this omap3-evm up and can just do a quick check for me as I don't have this board, can you try using the following command:
cat /sys/bus/platform/drivers/wl12xx_driver/wl12xx.0.auto/hw_pg_ver
and let me know what the output you get is?
Best Regards, Eyal
| |