lkml.org 
[lkml]   [2017]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY
From
Date
Hi Archit,


On 23-06-2017 10:36, Jose Abreu wrote:
> Currently HDMI 2.0 PHYs do not have a default configuration function.
>
> As *some* of the HDMI 2.0 PHYs have the same register layout as the 3D
> PHYs we can provide the same default configuration function for both
> and still let user overwrite this with custom configuration function
> if needed.
>
> If, for some reason, the PHY is custom or has a register different
> register layout then custom configuration function *must* be provided
> in order for the system to work correctly. As we prefer the pdata
> provided configuration function over the internal one this change
> will not make any impact in custom platforms.
>
> This patch is based on today's drm-misc-next branch.
>
> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> Tested-by: Mark Yao <mark.yao@rock-chips.com>

This is needed for RK3399 support. Can you please apply it?

Best regards,
Jose Miguel Abreu

> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Cc: Archit Taneja <architt@codeaurora.org>
> Cc: Andrzej Hajda <a.hajda@samsung.com>
> Cc: Mark Yao <mark.yao@rock-chips.com>
> Cc: Carlos Palminha <palminha@synopsys.com>
> Cc: Heiko Stübner <heiko@sntech.de>
>
> Changes in v2:
> - Rebased and refrased commit message
> ---
>
> Hi All,
>
> There as been a little confusion about dw-hdmi phys so I will expand a little bit
> here so that I can base my decision about this patch and why does it only works
> in some platforms.
>
> First, if you read dw-hdmi.c code, you will see that there is an identification
> register for the phy type being used. Unfortunatelly, this only states the phy type
> and not the phy version.
>
> Second, we have many HDMI 2.0 phys (so, same phy type: 0xf3) but, as you may have guessed,
> HW team decided to change regbank between some versions.
>
> Third and last, each phy in a SoC has unique characteristics, so each phy (event if
> they are the same version) will have different PLL configuration parameters.
>
> Given all this I managed to conclude that Mark's phy is still an HDMI 2.0 phy but with
> the same register layout as previous 3D PHY's. I found at least 2 phys with the same
> register layout and only 1 phy which has a different layout, so I think majority wins
> here and we should let the default configuration function for HDMI 2.0 phys be the same
> one as the 3D.
>
> Short story: There is no way to correctly identify, at runtime, the phy version being
> used by the controller so we can't provide a default configuration function. We can,
> however assume that most of the HDMI 2.0 phys will have the 3D layout BUT each developer
> must confirm that the layout in its SoC is the expected one and if not, provide a custom
> configuration function.
>
> Best regards,
> Jose Miguel Abreu
>
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index ead1124..10c8d8c 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2170,6 +2170,7 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
> .name = "DWC HDMI 2.0 TX PHY",
> .gen = 2,
> .has_svsret = true,
> + .configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
> }, {
> .type = DW_HDMI_PHY_VENDOR_PHY,
> .name = "Vendor PHY",

\
 
 \ /
  Last update: 2017-07-07 17:48    [W:0.044 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site