lkml.org 
[lkml]   [2017]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/6] pwm: mediatek: fix pwm source clock selection
From
Date
On Wed, 2017-07-05 at 13:09 +0200, Matthias Brugger wrote:
>
> On 06/30/2017 08:05 AM, Zhi Mao wrote:
> > In original code, the pwm output frequency is not correct
> > when set bit<3>=1 to PWMCON register.
> >
> > Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
> > ---
> > drivers/pwm/pwm-mediatek.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
> > index 5c11bc7..d08b5b3 100644
> > --- a/drivers/pwm/pwm-mediatek.c
> > +++ b/drivers/pwm/pwm-mediatek.c
> > @@ -91,7 +91,7 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> > if (clkdiv > 7)
> > return -EINVAL;
> >
> > - mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
> > + mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
>
> Just for clarification, BIT(15) enables old PWM mode, which ignores
> CLKSEL (BIT(3)). Therefore setting BIT(3) does not have any effect and
> can be discarded.
>
> Am I correct? I took mt7623n datasheet for reference.
>
> Regards,
> Matthias
>
Yes, remove setting bit<3> will not take any effect.
PWMCON bit<3> is pwm source clock selecting register.
You can check the datasheet of MT7623 for details.

Regards
Zhi

> > mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
> > mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
> >
> >


\
 
 \ /
  Last update: 2017-07-06 08:17    [W:0.999 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site