Messages in this thread | | | From | Andy Shevchenko <> | Date | Thu, 6 Jul 2017 00:28:09 +0300 | Subject | Re: [PATCH] parport_pc: Add support for WCH CH382L PCI-E single parallel port card. |
| |
On Wed, Jul 5, 2017 at 11:02 PM, Alexander Gerasiov <gq@redlab-i.ru> wrote: > WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382 > but serial ports are not soldered on board. Detected as > Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850]) > > Signed-off-by: Alexander Gerasiov <gq@redlab-i.ru> > --- > drivers/parport/parport_pc.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c > index 78530d1714dc..f00a87cd9ea9 100644 > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2646,6 +2646,7 @@ enum parport_pc_pci_cards { > netmos_9901, > netmos_9865, > quatech_sppxp100, > + wch_ch382_1p, > }; > > > @@ -2708,6 +2709,7 @@ static struct parport_pc_pci { > /* netmos_9901 */ { 1, { { 0, -1 }, } }, > /* netmos_9865 */ { 1, { { 0, -1 }, } }, > /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, > + /* wch_ch382_1p*/ { 1, { { 2, -1}, } },
Didn't you miss a space?
> }; > > static const struct pci_device_id parport_pc_pci_tbl[] = { > @@ -2797,6 +2799,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { > /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ > { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, > PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, > + /* WCH CH382L PCI-E single parallel port card */ > + { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382_1p}, > { 0, } /* terminate list */ > }; > MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl); > -- > 2.11.0 >
-- With Best Regards, Andy Shevchenko
| |