lkml.org 
[lkml]   [2017]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARC: clk: introduce HSDKv1 pll driver
On 07/27, Vineet Gupta wrote:
> Hi Stephen,
>
> On 07/14/2017 09:01 PM, Eugeniy Paltsev wrote:
> >HSDKv1 boards manages it's clocks using various PLLs. These PLL has same
> >dividers and corresponding control registers mapped to different addresses.
> >So we add one common driver for such PLLs.
> >
> >Each PLL on HSDK board consist of three dividers: IDIV, FBDIV and
> >ODIV. Output clock value is managed using these dividers.
> >
> >We add pre-defined tables with supported rate values and appropriate
> >configurations of IDIV, FBDIV and ODIV for each value.
> >
> >As of today we add support for PLLs that generate clock for the
> >HSDKv1 arc cpus, system, ddr, AXI tunnel and hdmi.
> >
> >By this patch we add support for several plls (arc cpus pll and others),
> >so we had to use two different init types: CLK_OF_DECLARE for arc cpus pll
> >and regular probing for others plls.
> >
> >Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
>
> Gentle ping, any chance you could look at this sometime.
>
> Thx,

Yes it's in the queue. Probably get to it tomorrow.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2017-07-28 03:24    [W:0.045 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site