lkml.org 
[lkml]   [2017]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/3] livepatch: introduce atomic replace
From
Date


On 07/21/2017 09:06 AM, Miroslav Benes wrote:
> On Wed, 19 Jul 2017, Jason Baron wrote:
>
>> Hi,
>>
>> In testing livepatch, I found that when doing cumulative patches, if a patched
>> function is completed reverted by a subsequent patch (back to its original state)
>> livepatch does not revert the funtion to its original state. Specifically, if
>> patch A introduces a change to function 1, and patch B reverts the change to
>> function 1 and introduces changes to say function 2 and 3 as well, the change
>> that patch A introducd to function 1 is still present. This could be addressed
>> by first completely removing patch A (disable and then rmmod) and then inserting
>> patch B (insmod and enable), but this leaves an unpatched window. In discussing
>> this issue with Josh on the kpatch mailing list, he mentioned that we could get
>> 'atomic replace working properly', and that is the direction of this patchset:
>> https://www.redhat.com/archives/kpatch/2017-June/msg00005.html
>
> Hi Jason,
>
> this has been on my TODO list for a long time now, so thanks for working
> on this. We have the same feature in kGraft and we use it heavily (in fact
> we distribute our patches as cumulative and "replace_all" how we call it).
>

Hi Miroslav,

Cool - we feel like this is an important feature as well and would like
to have an upstream solution as well.

> The forward port of the feature from kGraft is unfortunately not
> straightforward. We do not have a concept of klp_target_state there, so we
> can freely let functions to be patched or reverted in one go. We cannot do
> the same upstream. At first glance, you used nop function exactly for this
> case. Nice hack :).
>
>> Patches:
>>
>> 1) livepatch: Add klp_object and klp_func iterators
>> Just a prep patch for the 'atomic revert' feature
>>
>> 2) livepatch: add atomic replace
>> Core feature
>>
>> 3) livepatch: Add a sysctl livepatch_mode for atomic replace
>> Introduces a knob for enabling atomic replace. I hate knobs and perhaps
>> its possible to default to cumulative replace? Although I suspect there
>> are workflows relying on the existing behavior - I'm not sure. It may
>> be desirable to associate the knob with the patch itself as in the
>> 'immediate' flag, such that we don't introduce a global sysctl that
>> likely would also need to built-in, if there are patches in the initrd.
>
> Yes. I think it should be associated with the patch itself. This would
> allow more flexible behaviour. You could stack more patches on top of
> "atomic replace" patch.
>

Ok - associating the "atomic replace" with the patch itself makes sense
to me. It would also basically work, I think with the patch I proposed
except for the case where the the "atomic replace" was on top of several
non-"atomic replace" patches. The reason is that the "atomic replace" I
posted looks back 1 patch to see what it needs to replace (assuming all
patches are in atomic replace mode). So instead of just looking back 1
patch, it could 'look back' and make sure it was replacing all
previously loaded patches.


> Anyway, I'm on holiday next week, so I'll take a proper look the week
> after.
>

Ok - have a nice holiday!

Thanks,

-Jason


> Thanks,
> Miroslav
>

\
 
 \ /
  Last update: 2017-07-21 19:57    [W:0.440 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site