lkml.org 
[lkml]   [2017]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Date
    Subject[PATCH 3.16 093/178] powerpc: Disable HFSCR[TM] if TM is not supported
    3.16.46-rc1 review patch.  If anyone has any objections, please let me know.

    ------------------

    From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

    commit 7ed23e1bae8bf7e37fd555066550a00b95a3a98b upstream.

    On Power8 & Power9 the early CPU inititialisation in __init_HFSCR()
    turns on HFSCR[TM] (Hypervisor Facility Status and Control Register
    [Transactional Memory]), but that doesn't take into account that TM
    might be disabled by CPU features, or disabled by the kernel being built
    with CONFIG_PPC_TRANSACTIONAL_MEM=n.

    So later in boot, when we have setup the CPU features, clear HSCR[TM] if
    the TM CPU feature has been disabled. We use CPU_FTR_TM_COMP to account
    for the CONFIG_PPC_TRANSACTIONAL_MEM=n case.

    Without this a KVM guest might try use TM, even if told not to, and
    cause an oops in the host kernel. Typically the oops is seen in
    __kvmppc_vcore_entry() and may or may not be fatal to the host, but is
    always bad news.

    In practice all shipping CPU revisions do support TM, and all host
    kernels we are aware of build with TM support enabled, so no one should
    actually be able to hit this in the wild.

    Fixes: 2a3563b023e5 ("powerpc: Setup in HFSCR for POWER8")
    Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
    Tested-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
    [mpe: Rewrite change log with input from Sam, add Fixes/stable]
    Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
    [bwh: Backported to 3.16: adjust context]
    Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
    ---
    arch/powerpc/kernel/setup_64.c | 9 +++++++++
    1 file changed, 9 insertions(+)

    --- a/arch/powerpc/kernel/setup_64.c
    +++ b/arch/powerpc/kernel/setup_64.c
    @@ -198,6 +198,15 @@ static void fixup_boot_paca(void)

    static void cpu_ready_for_interrupts(void)
    {
    + /*
    + * Fixup HFSCR:TM based on CPU features. The bit is set by our
    + * early asm init because at that point we haven't updated our
    + * CPU features from firmware and device-tree. Here we have,
    + * so let's do it.
    + */
    + if (cpu_has_feature(CPU_FTR_HVMODE) && !cpu_has_feature(CPU_FTR_TM_COMP))
    + mtspr(SPRN_HFSCR, mfspr(SPRN_HFSCR) & ~HFSCR_TM);
    +
    /* Set IR and DR in PACA MSR */
    get_paca()->kernel_msr = MSR_KERNEL;

    \
     
     \ /
      Last update: 2017-07-16 16:06    [W:2.854 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site