Messages in this thread | | | Date | Wed, 7 Jun 2017 16:35:44 -0500 | From | Rob Herring <> | Subject | Re: [PATCH v5] MIPS: NI 169445 board support |
| |
On Wed, May 31, 2017 at 02:33:57PM -0500, Nathan Sullivan wrote: > Support the National Instruments 169445 board. > > Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> > --- > > Changes from v4: > > - Address Rob Herring's device tree feedback > > I'm still unclear on the vmlinux.its.S changes. The linux-mti tree has a > config in the image tree for each board it supports, and I followed that > pattern here. Rob was concerned about how the configs would scale wrt > the number of bootloaders around, but it's really just one per board/dt, > right?
It was more just a comment if I was MIPS maintainer, but I'm not so for the DT parts:
Acked-by: Rob Herring <robh@kernel.org>
> > --- > Documentation/devicetree/bindings/mips/ni.txt | 7 ++ > MAINTAINERS | 8 ++ > arch/mips/boot/dts/Makefile | 1 + > arch/mips/boot/dts/ni/169445.dts | 100 ++++++++++++++++++++++++ > arch/mips/boot/dts/ni/Makefile | 7 ++ > arch/mips/configs/generic/board-ni169445.config | 27 +++++++ > arch/mips/generic/Kconfig | 6 ++ > arch/mips/generic/vmlinux.its.S | 25 ++++++ > 8 files changed, 181 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mips/ni.txt > create mode 100644 arch/mips/boot/dts/ni/169445.dts > create mode 100644 arch/mips/boot/dts/ni/Makefile > create mode 100644 arch/mips/configs/generic/board-ni169445.config
| |