lkml.org 
[lkml]   [2017]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] Add bcm2835aux interrupt controller
From
Date
On 07/06/2017 21:37, Stefan Wahren wrote:
> Hi Phil,
>
>> Phil Elwell <phil@raspberrypi.org> hat am 7. Juni 2017 um 13:11 geschrieben:
>>
>>
>> Devices in the AUX block share a common interrupt line, with a register
>> indicating which devices have active IRQs. Expose this as a nested
>> interrupt controller to avoid IRQ sharing problems (easily observed if
>> UART1 and SPI1/2 are enabled simultaneously).
>>
>> The interrupt functionality could arguably be forked off as a separate
>> irqchip driver, but the clock driver has already claimed the AUX_IRQ
>> register so some driver and DT surgery would still be required.
>> Eric Anholt thought that including it here is reasonable, but I'm
>> prepared to split it out if this is considered too hacky.
>
> in order to give the maintainers (e.g. irqchip) a chance, they should be included into CC.

Will do.

>> Phil Elwell (2):
>> clk: bcm2835: Add AUX interrupt controller
>
> Either way the dt-binding must be updated as a separate patch. So Rob can review it.

Thanks, Stefan - I'll add that to v2.

Phil

\
 
 \ /
  Last update: 2017-06-12 01:12    [W:0.058 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site