lkml.org 
[lkml]   [2017]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: ath9k_htc - Division by zero in kernel (as well as firmware panic)
From
Date
Am 07.06.2017 um 02:12 schrieb Tobias Diedrich:
> Oleksij Rempel wrote:
>> Yes, this is "normal" problem. The firmware has no error handler for PCI
>> bus related exceptions. So if we filed to read PCI bus first time, we
>> have choice to Ooops and stall or Ooops and reboot ASAP. So we reboot
>> and provide an kernel "firmware panic!" message.
>> Every one who can or will to fix this, is welcome.
>>
>>> *****
>>> Jun 02 14:55:30 computer kernel: usb 1-1.1: ath: firmware panic!
>>> exccause: 0x0000000d; pc: 0x0090ae81; badvaddr: 0x10ff4038.
> [...]
>
>> memdmp 50ae78 50ae88
>
> 50ae78: 6c10 0412 6aa2 0c02 0088 20c0 2008 1940 l...j..........@
>
> [...copy to bin...]
> $ bin/objdump -b binary -m xtensa -D /tmp/memdump.bin
> [..]
> 0: 6c1004 entry a1, 32
> 3: 126aa2 l32r a2, 0xfffdaa8c
> 6: 0c0200 memw
> 9: 8820 l32i.n a8, a2, 0 <----------Exception cause PC still points at load
> b: c020 movi.n a2, 0
> d: 081940 extui a9, a8, 1, 1
>
> Judging from that it should be fairly simple to at least implement
> some sort of retry, possible after triggering a PCIe link retrain?

I assume, yes.

> There are some related PCIe root complex registers that may point to
> what exactly failed if they were dumped.
>
> The root complex registers live at 0x00040000 and I think match the
> registers described for the root complex in the AR9344 datasheet.

Suddenly I don't have ar7010 docs to tell..

> PCIE_INT_MASK would map to 0x40050 and has a bit for SYS_ERR:
> "A system error. The RC Core asserts CFG_SYS_ERR_RC if any device in
> the hierarchy reports any of the following errors and the associated
> enable bit is set in the Root Control register: ERR_COR, ERR_FATAL,
> ERR_NONFATAL."
>
> AFAICS link retrain can be done by setting bit3 (INIT_RST,
> "Application request to initiate a training reset") in
> PCIE_APP (0x40000).
>
> See sboot/magpie_1_1/sboot/cmnos/eeprom/src/cmnos_eeprom.c (which
> flips some bits in the RC to enable the PCIe bus for reading the
> EEPROM).
>
> The root complex pci configuration space is at 0x20000 which could
> have further error details:
>> memdmp 20000 20200
>
> 020000: a02a 168c 0010 0006 0000 0001 0001 0000 .*..............
> 020010: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 020020: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 020030: 0000 0000 0000 0040 0000 0000 0000 01ff .......@........
> 020040: 5bc3 5001 0000 0000 0000 0000 0000 0000 [.P.............
> 020050: 0080 7005 0000 0000 0000 0000 0000 0000 ..p.............
> 020060: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 020070: 0042 0010 0000 8701 0000 2010 0013 4411 .B............D.
> 020080: 3011 0000 0000 0000 00c0 03c0 0000 0000 0...............
> 020090: 0000 0000 0000 0010 0000 0000 0000 0000 ................
> 0200a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0200b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0200c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0200d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0200e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0200f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 020100: 1401 0001 0000 0000 0000 0000 0006 2030 ...............0
> 020110: 0000 0000 0000 2000 0000 00a0 0000 0000 ................
> 020120: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 020130: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 020140: 0001 0002 0000 0000 0000 0000 0000 0000 ................
> 020150: 0000 0000 8000 00ff 0000 0000 0000 0000 ................
> 020160: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 020170: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 020180: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 020190: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0201a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0201b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0201c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0201d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0201e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
> 0201f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
>
> Transformed into something suitable for feeding into lspci -F:
>
> 00:00.0 Description filled in by lspci
> 00: 8c 16 2a a0 06 00 10 00 01 00 00 00 00 00 01 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00
> 40: 01 50 c3 5b 00 00 00 00 00 00 00 00 00 00 00 00
> 50: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
> 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 70: 10 00 42 00 01 87 00 00 10 20 00 00 11 44 13 00
> 80: 00 00 11 30 00 00 00 00 c0 03 c0 00 00 00 00 00
> 90: 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00
> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> $ lspci -F /tmp/hexdump -vvv
> 00:00.0 Non-VGA unclassified device: Qualcomm Atheros Device a02a (rev 01)
> !!! Invalid class 0000 for header type 01
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 255
> Bus: primary=00, secondary=00, subordinate=00, sec-latency=0
> I/O behind bridge: 00000000-00000fff
> Memory behind bridge: 00000000-000fffff
> Prefetchable memory behind bridge: 00000000-000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [70] Express (v2) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0
> ExtTag- RBE+
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <1us, L1 <64us
> ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>

Looks promising :)

>>> Jun 02 14:55:30 computer kernel: usb 1-1.1: ath9k_htc: Transferred FW:
>>> ath9k_htc/htc_7010-1.4.0.fw, size: 72812
>
> $ ls -l /lib/firmware/ath9k_htc/htc_7010-1.4.0.fw
> -rw-r--r-- 1 root root 72812 Dec 14 04:59 /lib/firmware/ath9k_htc/htc_7010-1.4.0.fw
> $ sha1sum /lib/firmware/ath9k_htc/htc_7010-1.4.0.fw
> 959cb6550930de2882e12b9a549c3cf0c9bf51ac /lib/firmware/ath9k_htc/htc_7010-1.4.0.fw

--
Regards,
Oleksij

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-06-12 00:59    [W:0.069 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site