lkml.org 
[lkml]   [2017]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2 1/9] dt-bindings: spi: stm32: use SoC specific compatible
Date
This patch replaces st,stm32-spi compatible with st,stm32h7-spi SoC
specific compatible and updates the example accondingly.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/spi/spi-stm32.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-stm32.txt b/Documentation/devicetree/bindings/spi/spi-stm32.txt
index 3958bf6..415378b 100644
--- a/Documentation/devicetree/bindings/spi/spi-stm32.txt
+++ b/Documentation/devicetree/bindings/spi/spi-stm32.txt
@@ -7,7 +7,7 @@ from 4 to 32-bit data size. Although it can be configured as master or slave,
only master is supported by the driver.

Required properties:
-- compatible: Must be "st,stm32-spi".
+- compatible: Must be "st,stm32h7-spi".
- reg: Offset and length of the device's register set.
- interrupts: Must contain the interrupt id.
- clocks: Must contain an entry for spiclk (which feeds the internal clock
@@ -38,7 +38,7 @@ Example:
spi2: spi@40003800 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "st,stm32-spi";
+ compatible = "st,stm32h7-spi";
reg = <0x40003800 0x400>;
interrupts = <36>;
clocks = <&rcc SPI2_CK>;
--
1.9.1
\
 
 \ /
  Last update: 2017-06-27 17:48    [W:0.108 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site