lkml.org 
[lkml]   [2017]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm: boot: dts: artpec6: Remove unnecessary interrupt-parent property from sub-nodes
From
Date
Acked-by: Niklas Cassel <niklas.cassel@axis.com>

On 06/27/2017 02:15 PM, surenderp@techveda.org wrote:
> From: Surender Polsani <surenderp@techveda.org>
>
> "interrupt-parent" property is declared in root node, so it is global
> to all nodes. This property is re-declared in few sub-nodes. To avoid
> duplication this property is removed from following sub-nodes:
> pmu, amba@0, amba@0/ethernet.
>
> Signed-off-by: Surender Polsani <surenderp@techveda.org>
> ---
> arch/arm/boot/dts/artpec6.dtsi | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
> index 767cbe8..2ed1177 100644
> --- a/arch/arm/boot/dts/artpec6.dtsi
> +++ b/arch/arm/boot/dts/artpec6.dtsi
> @@ -151,7 +151,6 @@
> interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> interrupt-affinity = <&cpu0>, <&cpu1>;
> - interrupt-parent = <&intc>;
> };
>
> pcie: pcie@f8050000 {
> @@ -185,7 +184,6 @@
> compatible = "simple-bus";
> #address-cells = <0x1>;
> #size-cells = <0x1>;
> - interrupt-parent = <&intc>;
> ranges;
> dma-ranges = <0x80000000 0x00000000 0x40000000>;
> dma-coherent;
> @@ -195,7 +193,6 @@
> clocks = <&eth_phy_ref_clk>,
> <&clkctrl ARTPEC6_CLK_ETH_ACLK>;
> compatible = "snps,dwc-qos-ethernet-4.10";
> - interrupt-parent = <&intc>;
> interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> reg = <0xf8010000 0x4000>;
>
>

\
 
 \ /
  Last update: 2017-06-27 14:28    [W:0.198 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site